ZESTRON Academy Announces 2020 Cleaning Webinar Schedule


Reading time ( words)

ZESTRON Academy, the global leading provider of cleaning process education to the electronics manufacturing and semiconductor industries, is pleased to announce the 2020 Cleaning Webinar Series schedule. ZESTRON Academy continues to educate production line operators, manufacturing and quality control managers as well as process engineers by providing detailed industry knowledge and troubleshooting techniques.

All webinars are FREE of charge, and will be presented by ZESTRON Academy’s accredited experts, Umut Tosun, M.S.Ch.E., Application Technology Manager, Ravi Parthasarathy, M.S.Ch.E., Senior Application Engineer, and Jigar Patel, M.S.Ch.E., Senior Application Engineer.

Featured topics:

  • Should You Clean PCBs? (March 26)
  • Cleaning Before Conformal Coating (April 23)
  • Cleaning with pH Neutral Chemistry (May 28)
  • Jet Printing Solder Paste and Cleaning Challenges (June 18)
  • Surface Cleanliness Assessment (July 23)
  • Defluxing Advanced Packages (August 27)
  • Solder Mask and Low Stand-off Component CleaningA Connection? (September 17)
  • Multiple Thermal Cycles (October 29)

For more information on ZESTRON Academy or to register for our cleaning webinar series, please visit ZESTRON Academy.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/14/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.



Copyright © 2021 I-Connect007. All rights reserved.