AIM Announces Research & Development Laboratory Expansion in Montreal

Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce the expansion of the Research and Development Laboratory at its Montreal, Canada facility, bolstering an already extensive R&D network with laboratories in Mexico, Poland and China.

As the needs of the electronics assembly market evolve, AIM continues to work relentlessly to invigorate and adjust its Research & Development program. The newly built chemical laboratory and technical offices boast new state-of-the-art equipment and a thirty-five percent increase in square footage. Phase two of the expansion is underway and will include doubling the size of the company’s applications lab and testing area.

AIM’s continued investment in its already extensive R&D capabilities enables the company to deliver on its promise of offering innovative soldering solutions now and into the future.

“AIM Solder continues to aggressively invest in its R&D program, to stay ahead of the technology curve and solidify its presence at the forefront of innovative product development in the electronics assembly industry,” said David Suraski, AIM Solder’s Executive Vice President, AMD. “The recent expansion of the R&D laboratory in Canada, in addition to our lab capabilities around the world, solidifies AIM’s commitment to remaining an industry leader.”

To learn more about AIM Solder’s complete line of advanced solder products and global technical support, visit



Suggested Items

Tech 2 Tech: KYZEN’s Short Technical Sessions a Big Hit

01/20/2021 | Nolan Johnson, I-Connect007
Nolan Johnson gets an update from Tom Forsythe on KYZEN’s Tech 2 Tech sessions. These brief 15-minute sessions were set up during the pandemic by KYZEN for customers, prospects, and new engineers around cleaning, and have since found traction with their manufacturers, reps and distributors.

This Month in SMT007 Magazine—Continuous Improvement: As Simple as X = Xc – 1

01/04/2021 | I-Connect007 Editorial Team
X=Xc – 1 is a conceptual equation for continuous improvement. You define X and work to reduce it by a factor of 1. This could be one work hour, one process step, one day less in a cycle, and so on. We recently met with Dr. Ron Lasky to discuss the concept of X=Xc – 1 and get his advice on generating enthusiasm among readers and the next generation about continuous improvement. As this discussion illustrates, many process improvements are small in scale, not yearlong, major efforts.

Top 10 Most-Read SMT Articles of 2020

12/31/2020 | I-Connect007
As 2020 comes to a close, the I-Connect007 Editorial Team takes a look back at its most read articles. Here are the top 10 reads in SMT from the past year.

Copyright © 2021 I-Connect007. All rights reserved.