Datest to Exhibit at SMTA Dallas and Houston Expos


Reading time ( words)

Datest, a leading provider of advanced, efficient and mission-critical in-circuit testing, test engineering and X-ray inspection solutions, announces that it will exhibit the SMTA Dallas and Houston Expo & Tech Forums. The Dallas Expo is scheduled to take place Tuesday, March 24, 2020 at the Plano Event Center in Plano, TX, and the Houston Expo will be held Thursday, March 26, 2020 at The Stafford Centre in Stafford, TX.

Datest’s President Robert Boguski will present “CT Scanning: 3 Case Studies” at the SMTA Dallas Expo. Digital Computed Tomography, or CT Scanning, has advanced in both equipment as well as techniques in recent years, such that it has now become the method of choice in many applications where workmanship, fabrication, process and component-related defects are difficult, and often otherwise virtually impossible to find. Nevertheless, misconceptions linger concerning the suitability of CT scanning as a nondestructive test and failure analysis methodology.

This presentation will address some of those misconceptions by featuring three specific and recent applications of CT scanning, illustrating its wide potential for use as a diagnostic tool. Examples will be shown from the medical/biotech, military/aerospace, and electronics sectors. In each case Mr. Boguski will state the specific problem to be addressed; highlight some significant, if not decisive images; and show conclusions drawn from compilation and analysis of the images, with any applicable lessons learned along the way.

Additionally, the team will discuss the Datest’s testing, engineering and PCB reverse engineering services, and value-added services including:

  • Bonepile Rehabilitation Services
  • 3D and CT-Scan X-ray/Failure Analysis Service
  • Improved and enhanced flying probe test services
  • Improved and enhanced in-circuit testing services
  • Datest’s “ecosystem” of partner companies providing analytical laboratory services in the areas of failure analysis, root cause detection, and materials science studies

Datest provides advanced test engineering and inspection services to the CM/EMS and OEM communities, and many other industries. The team prides itself on their speed and flexibility in providing the best solution to each customer’s unique testing needs. With more than 34 years of expertise, Datest offers in-circuit testing (ICT), flying probe testing, X-ray inspection, boundary scan/JTAG testing, functional testing, failure analysis and other related services. Datest is an

ISO9001:2015, ITAR and AS9100D-certified company, and a member of IPC, SMTA, EIPC, IEEE and ASNT.

The company’s representative, Southwest Systems Technology, Inc. also will represent the company at the SMTA Dallas and Houston Expos.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.