The Next Generation: 2K Conformal Coatings

Reading time ( words)

This webinar serves as an introduction to two-component (2K) coating systems and the overall benefits that are achievable.

Watch & Learn! Final Installment of I-007e Micro Webinar Series Features 2k Coating Systems

In this engaging, 12-part webinar series, Kinner examines conformal coating chemistries in further detail, including their properties, applications, issues to be mindful of, and the processes you should follow to achieve a successful coating outcome. The entire “Coatings Uncoated!” webinar series can be viewed in an hour and covers a comprehensive range of hot topics and application-relevant case-study overviews, as well as back-to-basic subject matter and issues, such as condensation and contamination. Most of the 12 segments can be viewed in five minutes or less.

The twelfth and final episode of the “Coatings Uncoated!” series is now available to view. In “The Next Generation: 2k Conformal Coatings,” topic expert Phil Kinner from Electrolube examines how these coatings differ from the more traditional options, such as how they perform like a resin and behave like a coating. If you are in the assembly business, an EMS company, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.

Watch “The Next Generation: 2k Conformal Coatings,” in under 5 minutes! The previous segments of “Coatings, Uncoated!” are also available to watch free.

Got five minutes? Visit iconnect007.com/webinar/cu.

Download Kinner’s companion book, The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments.

04/22/2020 | I-Connect007

With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

04/14/2020 | Pete Starkey, I-Connect007

SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

04/07/2020 | Nolan Johnson, I-Connect007

Nolan Johnson talks to Greg Vance about taking over the SMTA Board President's role through September. Discussion includes an update on multiple board chair changes, and an update on the board's work to achieve their current set of objectives.