New HEN2GEN Nitrogen Generator Collaboration


Reading time ( words)

Hentec Industries/RPS Automation is excited to collaborate with South-Tek Systems on custom N2 Generators for the Vector and Valence Selective Soldering Machines. The HEN2GEN N2 Generators are designed to produce a wide range of flow rates at nitrogen purities from 95% up to 99.999%. Some of the benefits of the HEN2GEN systems are: being fully automated, favorable ROI, reduced cost compared to a gas company, life expectancy of over 20 years, industry leading warranty, 24/7 customer support, and the usage of Smart-Trak to remotely monitor and manage the nitrogen from any mobile device.

South-Tek Systems is a nitrogen generator manufacturer, based out of Wilmington, North Carolina. South-Tek Systems is committed to providing innovative, high quality, well-engineered, and cost-effective Nitrogen Generator Systems.

Share

Print


Suggested Items

Semiconductors in Charge: The Changing Face of PCB Manufacturing

03/11/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team recently spoke with Chuck Bauer and Dana Korf in a technical discussion that spanned a number of topics around shrinking components, such as redistribution layers (RDLs), active embeddeds, and why even the most revolutionary technologies must show ROI to be successful.

Maximising Performance and Reliability of Automotive Electronics With Conformal Coatings

11/20/2019 | Phil Kinner, Electrolube
While the value of the electronic systems in a modern vehicle typically exceeds 20% of the total vehicle cost, many estimate that this value will exceed 35% within the next five years. With the increased adoption of electronic vehicles and the development of the internet of things (IoT)—which has brought us driverless cars like those being tested by Google in California and BMW on the roads of Bavaria—the future of this industry is starkly different from that of the 1970s when electronic fuel injection systems were first introduced to mainstream production.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.



Copyright © 2020 I-Connect007. All rights reserved.