Indium Corporation Expert to Participate in SMTA Wisconsin SMT Printing Webinar


Reading time ( words)

Indium Corporation’s Adam Murling, Technical Support Engineer, will participate in an SMTA Wisconsin SMT Printing Roundtable Discussion webinar on Tuesday, June 2 at 3:30 p.m. CDT.

The webinar is designed to be an open discussion about SMT printing challenges in the industry and will start with a Printing 101—the basics of SMT printing. Topics covered will include insufficient solders, excessing solders, high tension stencils, nanocoating (life), paste size and pin-in-paste.

The webinar is free to SMTA members and is $25 for non-members. Reserve your attendance by Friday, May 29. The webinar link will be sent to those who pre-register for the event here. Attendees are encouraged to submit questions to pjwilson@ra.rockwell.com.

Murling is responsible for providing leading-edge technical support for customers around the globe through SMT process optimization, material recommendations, and customer training. He nurtures existing accounts and assists in strategy development for obtaining new accounts. Murling also plans and executes customer and internal designs-of-experiments. He is a Certified SMT Process Engineer, an active blogger, and has authored technical papers on wave solder fluxes and solder preforms. Murling has a bachelor’s degree in chemical engineering and a master’s degree in engineering management from Clarkson University.

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

Share

Print


Suggested Items

Organizational and Team Management in Times of Change

09/01/2020 | Barry Matties, I-Connect007
Ross Berntson, president and COO of Indium Corporation, shares his perspective, thoughts, and lessons learned on managing his global organization as Indium Corporation responds to health issues, market demand shifts, and organizational change. This interview was conducted in May 2020.

Dr. Ron Lasky: A Solder Alloy and Solder Paste Overview

06/19/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team spoke with Dr. Ron Lasky about why the world has not embraced some of the exciting alloys that companies like Indium Corporation have developed. He also provides an overview of solder alloys, including the difficulty of qualifying SAC305.

TQM: The Tyranny of the Urgent

06/10/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team recently spoke with Dr. Ron Lasky about what’s stopping companies from improving their processes, especially regarding productivity.



Copyright © 2020 I-Connect007. All rights reserved.