Seika Upgrades Options for McDry Electronic Drying Storage Cabinets

Reading time ( words)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, is pleased to announce new upgraded features for all McDry Electronic Drying Storage Cabinets.

Available options include MSD control tracking software and multiple data loggers including wireless, intranet and cloud-based systems with alert capabilities.

Upgraded features include:

  • Energy-saving Eco-mode equipped
  • Drying unit including fan quickly dehumidifies
  • Door open/closing frequency: Once every 10-20 minutes
  • Equipped with a digital RH Meter
  • Doors seal lightly and lockable
  • Compliant to ESD-IEC61340-5-1 Standard
  • Powerful desiccant never needs replacement
  • Shelves are adjustable and can hold 220lbs (100kg)

McDry Electronic Drying Storage Cabinets provide optimal ultra-low humidity and moisture-proof storage for IC packages. All McDry models maintain one percent RH. Compared with the past version, the new model’s dehumidification speed and recovery to set point is two to three times faster.


Suggested Items

Book Excerpt: The Printed Circuit Assembler’s Guide to Process Validation

12/24/2020 | Graham Naisbitt, Gen3 Systems
It is assumed that readers are familiar with manufacturing electronic circuit assemblies in accordance with IPC-J-STD-001 or IEC 61189-1; both are titled “Requirements for Soldered Electrical and Electronic Assemblies.” In October 2018, IPC-J-STD-001 Revision G was amended and released with a new Section 8 of the document titled “Cleaning.” The change was primarily the removal of a “cleanliness” level of 1.56 mg/square cm of NaCl equivalence. This small change has great significance in relation to how companies ensure the electrochemical reliability of their products.

TQM: The Tyranny of the Urgent

06/10/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team recently spoke with Dr. Ron Lasky about what’s stopping companies from improving their processes, especially regarding productivity.

Maximising Performance and Reliability of Automotive Electronics With Conformal Coatings

11/20/2019 | Phil Kinner, Electrolube
While the value of the electronic systems in a modern vehicle typically exceeds 20% of the total vehicle cost, many estimate that this value will exceed 35% within the next five years. With the increased adoption of electronic vehicles and the development of the internet of things (IoT)—which has brought us driverless cars like those being tested by Google in California and BMW on the roads of Bavaria—the future of this industry is starkly different from that of the 1970s when electronic fuel injection systems were first introduced to mainstream production.

Copyright © 2022 I-Connect007. All rights reserved.