Seika Machinery Hosts Summer Sale on Select Products


Reading time ( words)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, announces a special summer sale on select products. Significant savings are available for McDry cabinets, Sawa stencil cleaners, Sayaka PCB routers, Malcom viscometers, paste mixers and profiler systems while stock lasts. 

McDry Dry Cabinets provide optimal ultra-low humidity and moisture-proof storage for IC packages. Moisture-sensitive components when safely and properly stored in McDry have an indefinite floor-life and micro-cracking or pop-corning during the reflow process is not an issue. McDry cabinets conform to IPC/JEDEC J-STD 033D and IPC 1601 Guidelines.

Sawa Stencil Cleaners are widely used globally to ensure high yields when screen printing solder paste onto printed circuit boards. Normal cloth wipe cleaning of stencils cannot completely remove solder paste especially in fine pitch applications as a small amount of solder balls have a tendency to adhere in the corners of the apertures.

Sayaka PCB Routers provide stress-free depanelization along with a fixture-based highly efficient dust vacuum system. In addition to clean and precise depanelization for densely populated PCBs, the router features easy, advanced image-processing software with point-and-click operation for programming router paths.

The MALCOM RCX Series Modular Reflow Oven Profiling System offers complete profiling of reflow ovens, including oven temperature, video imaging, O2 concentration and convection air velocity. It verifies that ovens are performing at optimal conditions, and enables users to troubleshoot problem areas.

The PCU-285 Spiral Viscometer is designed to measure solder paste viscosity. It offers new functions that make it possible to create, execute and store measurement programs with or without a PC. The system uses a touch panel display for improved functionality and visibility.

 

 

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/15/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.



Copyright © 2021 I-Connect007. All rights reserved.