Electrolube Announces New Stock of IPA Wipes for Technical Cleaning


Reading time ( words)

Since the outbreak of Coronavirus (COVID-19), demand for alcohol-based sanitising products has increased sharply, leading to global shortages of isopropyl alcohol. Electrolube, the global electro-chemicals manufacturer, has seen a dramatic rise in demand for its IPA wipes, IPA100, which quickly sold out globally amidst the pandemic due to their high isopropanol content. However, the company is pleased to announce the pre-saturated cleaning wipes are back in stock and can be used for a diverse range of cleaning requirements.

Electrolube IPA100 are tough lint-free wipes in a handy tub of 100 for any engineer or design engineer’s workbench. Made up of 70% Isopropanol and 30% demineralised water, they are designed to wipe away the toughest of materials such as thermal pastes, greases, solder pastes and other spillages from the work bench or from the PCB during rework and repair.

The IPA100 wipes are not only ideal for all general cleaning applications, but due to their high isopropyl alcohol concentration, they ensure highly effective disinfection. IPA100 helps penetrate the cell wall of viruses more completely to infiltrate the entire cell, congeal all proteins and kill the microorganism.  Isopropanol is an internationally approved solvent, which cleans to standards required by major electronics manufacturers. The IPA100 wipes demonstrate excellent cleaning and degreasing properties in one easy cleaning step, leaving a clean, dry surface without any residue.

Ron Jakeman, Electrolube’s Managing Director, comments, “Electrolube’s IPA100 pre-saturated cleaning wipes have become integral to so many workplaces, for a variety of different cleaning purposes. We are delighted to be able to announce that this versatile product is back in stock, at a much needed time for everyone. As an electro-chemicals manufacturer, we are doing our best to meet the sharp increase in demand, which has presented its own challenges due to global shortages of isopropyl alcohol, and we are making every effort to prop up and supply as much product and support as possible for our customers by using all of our multiple manufacturing resources, as quickly as possible.”

When it comes to maintaining a clean, hygienic and disinfected environment, IPA100 wipes are an efficient and effective solution to removing contaminants. For further information about Electrolube’s IPA wipes, please visit www.electrolube.com.

About Electrolube

Electrolube, a division of H.K. Wentworth Limited, is a leading manufacturer of specialist chemicals for electronics, automotive and industrial manufacturing.  Core product groups include conformal coatings, contact lubricants, thermal management materials, cleaning solutions, encapsulation resins and maintenance and service aids.

The extensive range of electro-chemicals at Electrolube enables the company to offer a ‘complete solution’ to leading manufacturers of electronic, industrial and domestic devices, at all levels of the production process. Through collaboration and research, the company is continually developing new and environmentally friendly products for customers around the world and their commitment to developing ‘greener’ products has been endorsed by the ISO 14001 standard for the highly efficient Environmental Management System in place at the company.

Winners of the Queen’s award for Enterprise 2016, Electrolube is represented in over 55 countries with an established network of subsidiaries and distributors. By offering genuine security of scale and a reliable supply chain, the company is able to deliver a truly tailored service.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.