AIM to Participate at productronica China 2020


Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce their participation at productronica China, scheduled to take place July 3-5, 2020 at Shanghai New International Expo Centre in Shanghai, China. AIM will highlight their NC273LT low temperature solder paste for bismuth bearing alloys, RX18 and CX18 no clean flux cored solder wire along with their full line of solder assembly materials.

AIM's NC273LT low temperature solder paste provides assemblers another tool to meet the changing needs of an evolving PCB assembly market. With peak reflow temperatures below 170°C, NC273LT reduces component and substrate warpage, reduces thermal exposure and saves energy. NC273LT paste improves the wetting performance of bismuth alloys to RoHS compliant plating and surface finishes. NC273LT provides long stencil life, excellent transfer efficiencies and minimizes solder balling common to high bismuth alloys. When thermal exposure during the assembly process is a limitation, NC273LT is an excellent RoHS compliant replacement.

AIM's RX18 and CX18 continue to achieve unprecedented customer acceptance. Engineered for automated/robotic selective soldering, RX18 promotes thermal transfer, fast wetting and reduces voids/skips. Additionally, RX18 is extends solder iron tip life and leaves minimal flux residue. CX18 is an operator friendly, low odor/smoke formula, and speeds soldering performance leaving a clear, electrically safe residue that does not require removal. Further throughput and reliability gains can be realized when CX18 and RX18 are combined with AIM's REL61™ and REL22™ alloys. REL22 improves product survival in extreme thermal exposure operating environments such as under-hood automotive, avionics/aerospace and LED lighting. REL61 is ideally suited for industries which require a cost effective alternative to SAC305 with no loss of processing performance or durability. 

Along with these products, AIM will also showcase its full line of advanced solder materials, including solder paste, liquid flux and solder alloys. To discover all of AIM’s products and services, visit the company at productronica China at the National Exhibition and Convention Center (Shanghai) in hall 5.1 booth A206 and speak with one of AIM’s knowledgeable staff members.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.