Sanitize Almost Anything with the Mega ION from Austin American Technology


Reading time ( words)

Austin American Technology (AAT) offers companies a way to keep their products and employees safer during COVID-19 with the Mega ION® cleaning system designed for solvent-based cleanliness. The machine works as a COVID-19 fighting parts & tool sanitizer: if it can get wet, it can be sanitized by the Mega ION®.

Whether your employees handle parts and tools that need to be thoroughly cleaned between shifts, or you work in the medical industry and rely on a sterile environment, the Mega ION® can kill germs on anything that can get wet.

The Mega ION® is compatible with multiple solvents including but not limited to DI water, water alcohol mixtures, pure alcohol, evaporative hydrocarbons (like cyclohexane) commercial solvent blends not requiring a water rinse.

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Tips to Improve Soldering Tip Life and Reduce Cost

10/10/2018 | Thermaltronics
Whether in production, or repair and rework, the cost of soldering iron tips can be easily overlooked, but with today’s requirement for higher temperatures in lead-free solder applications, the consumption of tips has dramatically increased. This fact, combined with changes in tip design to meet the higher thermal load requirements, has also resulted in escalating tip costs, making tip care a high priority.

Drying Boards after Rework Cleaning—To Do or Not to Do?

09/19/2017 | Bob Wettermann, BEST Inc.
In cases where water soluble fluxes are being used in the rework process, in cases where the components need to have flux residues washed off, or in cases where the board needs to be cleaned with water for subsequent conformal coating touchup, proper drying and perhaps even bake out procedures need to be performed.



Copyright © 2020 I-Connect007. All rights reserved.