iNEMI Publishes Best Practices for Electronic Equipment When Disinfecting for COVID-19


Reading time ( words)

The International Electronics Manufacturing Initiative (iNEMI) announced publication of “Recommended Best Practices for Protecting the Reliability and Integrity of Electronic Products and Assemblies when Disinfecting for SARS-CoV-2 (COVID-19).”

“With the COVID-19 crisis, several of our members have contacted iNEMI for guidance on how to mitigate the possible detrimental impact of disinfecting procedures on electronic equipment and assemblies,” said Marc Benowitz, iNEMI CEO. “There are guidelines from groups such as the U.S. EPA, CDC and the World Health Organization (WHO) regarding cleaning and disinfecting for COVID-19, but none of these address the impact of disinfectants and their application methods on electronic equipment and assemblies.”

“Many commonly recommended disinfection substances and/or application methods could potentially cause failures in electronic equipment if the internal electronics were inadvertently exposed to them,” continued Benowitz. “This is an obvious concern for electronics manufacturers who are wanting to ensure the safety of their employees, supply chain partners and customers, while protecting the reliability and integrity of their products.”

Benowitz explains that, in response to this industry need, a team of experts from across iNEMI member organizations reviewed key industry, government and technical sources and assembled a best practices document. The team assessed the chemicals included in the U.S. EPA List N: Disinfectants for Use Against SARS-CoV-2 (COVID-19) and common application methods, identifying those substances that minimize the risk of negative impact on electronic equipment when applied in an appropriate manner. 

iNEMI’s best practices are now available on the iNEMI website.

Share

Print


Suggested Items

Real Time with… SMTAI 2020: Insituware Offers Handheld Process Controls for the Smart Factory

09/21/2020 | Real Time with...SMTAI
Nolan Johnson speaks with Insituware CEO and Chief Engineer Michael Frederickson. Insituware’s expertise in materials control and measurement brings some innovative new handheld measurement devices to the manufacturing floor. Mike and Nolan discuss how these new devices contribute to accuracy, compliance, and real-time process optimization—all key factors in the smart factory environment. Mike also teases what the company will demonstrate in their virtual booth at SMTAI.

Real Time with…SMTAI 2020: SMTA International Goes Virtual

09/16/2020 | Nolan Johnson, I-Connect007
Nolan Johnson connected with three SMTA principals—KYZEN’s Debbie Carboni, SMTA’s Ryan Flaherty, and Rockwell’s Greg Vance—to discuss the upcoming 2020 SMTA International (SMTAI) event, the first major electronics manufacturing conference and exhibition to go virtual this year. The panel gives an overview of exhibits, technical conference presentations, and professional networking in this new format. and provides some coaching on how to to get the most from this virtual event.

Real Time with…SMTAI 2020: Koh Young on New Products and the Role of AI

09/16/2020 | I-Connect007 Editorial Team
Nolan Johnson speaks with Joel Scutchfield, director of sales for the Americas, about Koh Young's exhibit at SMTAI. Scutchfield outlines all the new products being displayed in the virtual booth and discusses the increased role that the company sees for AI in their products and the smart factory flow.



Copyright © 2020 I-Connect007. All rights reserved.