Accu-Assembly Inc. Releases AccuID SMT Component Reel Barcode Decoding System


Reading time ( words)

Accu-Assembly Inc., a leading industrial automation company, is pleased to introduce the AccuID. The new bench top system has been designed to easily produce a unique Reel ID barcode label for each SMT component reel rather than having an operator scan one label at a time using a hand scanner. The operator does not have to decide which barcode labels to scan resulting in fewer scan errors. The AccuID has a simple user interface: the operator places the reel in the system and the scan begins automatically.

The camera on the AccuID can decode all of the barcodes on the reel in about two seconds and then send the required data to your database based on the prefix on each label. For example, 1P means supplier part number and Q means quantity. The decoding is omni-directional, and AccuID can decode down to 5 mils on 1D barcode labels and down to 10 mils on 2D barcode labels.

Accu-Assembly’s software will emulate keystroke to send the label to any application on your PC in a pre-determined sequence, so no special software is required in most cases. The software can interface with most existing SMT placement equipment systems.

Additionally, AccuID can be used for incoming inspection to verify the accuracy of the barcode labels on the reel. Applications include creating and printing a unique SMT component reel ID barcode label for: inventory systems, SMT placement equipment verification systems, and traceability.

The AccuID has the capability to read multiple barcodes in any orientation on SMT component reels in a single pass. It can accommodate component reels from 7 in. diameter to 15 in. diameter. Additionally, the low-cost system comes in a small footprint – desktop unit – 17in.(W) x 15in.(D) x27in.(H).

Share

Print


Suggested Items

An EMS Perspective on Inventory Management

08/27/2020 | I-Connect007 Editorial Team
Foad Ghalili of Epoch International discusses the inventory management practices the company has in place between its two facilities in Fremont, California, and Dalian, China; and how upgrading to an electronic management system made maintaining a much larger inventory possible.

This Month in SMT007 Magazine: How Engineers Can Use SPI Tools for Verification

05/06/2020 | Nolan Johnson, I-Connect007
Koh Young’s Ray Welch and Brent Fischthal detail how engineers can work with SPI tools to verify how small they can go in component size with their solder paste application, and how the company’s SPI equipment is helping not only to verify but also to help drive the development collaboration between solder paste and stencil printer manufacturers, and inspection tools and software.

The Foundation of Industry 4.0

04/15/2020 | Oren Manor, Mentor, a Siemens business
When adopting IoT solutions, start with three main considerations. First, assess which parts of the production cycle can be automated and/or monitored most effectively with IoT devices connected to an analytics platform. IoT technology should be matched to the production cycle of your operation.



Copyright © 2020 I-Connect007. All rights reserved.