Bittele Electronics Announces its Approval for the Ontario Made Program


Reading time ( words)

Bittele Electronics Inc., a Toronto-based PCB assembly firm specializing in prototype and small-volume to mid-volume printed circuit board assembly, is proud to announce today that it has been approved for the Ontario Made Program.

Supported by the Ontario government and funded through Ontario Together Fund, the Canadian Manufacturers & Exporters’ Ontario Made program was launched in July 2020 with the mission of promoting the many world-class goods that are made across the province by helping businesses and consumers easily identify, access, and purchase local products. The Ontario Made program will promote locally made products and help build a strong, self-sufficient province that is vital to its economic recovery.

"Bittele is proud to be approved for the Ontario Made Program. We invested in our Markham facility in June 2019 and now employ 50 people in Ontario. Our Markham facility uses world class, high tech equipment to provide printed circuit board (PCB) assembly services to Canadian businesses. We supply PCBs to many customers across Canada,” says Ben Yang, CEO of Bittele Electronics, Inc.

Bittele's Markham manufacturing facility is a 14,000-square-foot assembly house, featuring state-of-the-art automated printed circuit board assembly equipment, solder paste printing, component placement, reflow, and inspection equipment. The Markham facility enables Bittele to provide its customers outstanding PCB fabrication and PCB assembly quality with flexibility, quick turn times, fast shipping, and improved communication.

Bittele is featured on the Ontario Made Program website along with all other approved businesses. "Bittele is pleased to be part of the Ontario Made Program by providing PCB Assembly services to all Canadian businesses from our Markham facility," added Mr. Yang.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.