AQS, Inc. Installs New SV500 BGA Rework System


Reading time ( words)

AQS, Inc., a state-of-the-art EMS provider located in Silicon Valley, is pleased to announce that it has purchased an SV500 BGA Rework System from Precision PCB Services, Inc.

Bruce Lee, VP of Operations, commented, "The SV550 BGA rework station is very easy to operate with minimal clearance for rework. Customers with non-working boards do not need to throw away the entire board due to a defective BGA device. AQS now can replace the BGA devices and have them working again. Save your time and money."

The SV 550 BGA Rework System features split-vision alignment for removal, placement, and soldering of BGAs, CGAs, CSPs, QFPs, LGAs and other SMDs. The vision system is capable of placing components from 6mm to 60mm on PCBs as large as 26 inches.

With a mission of providing customers with a high-quality one-stop solution for all their needs so that they can thrive in any dynamic competitive environment, the company works continuously to create the best product for its customers to dominate the market and raise the bar. For more information, visit www.aqs-inc.com. 

Share

Print


Suggested Items

This Month in SMT007 Magazine: Robustness Is Not the Same as Reliability

09/02/2020 | I-Connect007 Editorial Team
Bob Neves discusses a disconnect he sees in reliability testing between what’s being tested and what happens out in the field, as well as why most reliability tests these days should instead be considered robustness tests.

Just Ask Joe: The Occam Process

08/25/2020 | I-Connect007 Editorial Team
First, we asked you to send in your questions for Happy Holden. Now, it’s Joe Fjelstad’s turn! Inventor, columnist, instructor, and founder of Verdant Electronics, Joe has been involved with rigid PCBs and flexible circuits for decades, and he’s ready to share some of his knowledge with our readers. We hope you enjoy “Just Ask Joe.”

MTV Offers Solder Paste Testing Solution

06/17/2020 | Nolan Johnson, I-Connect007
The miniaturization test vehicle (MTV) is a common benchmark test board that can gauge about 25 different paste properties and analyze how different solder pastes will perform in an assembly line. Chrys Shea details the work she’s done to develop and release the MTV.



Copyright © 2020 I-Connect007. All rights reserved.