AQS, Inc. Ramps up X-ray Capabilities with SEC


Reading time ( words)

AQS, Inc., a state-of-the-art EMS provider located in Silicon Valley, is pleased to announce that it has purchased an X-eye 5000N- 2D X-ray from SEC. The easy-to-use system is ideal for non-destructive analysis of semiconductor, SMT and electronic components.

The X-eye 5000N Series features a 100kV-130kV micro-focus closed-loop tube and high-definition flat panel detector. The system will be installed at AQS’ Dallas facility. Bruce Lee, VP of Operations, stated: "We're excited to announce this acquisition. Our mission is to provide our customers a one-stop solution for all of their needs in high quality electronics manufacturing and engineering services so that they can thrive in any dynamic competitive environment."

SEC is a leading inspection equipment provider, providing industrial X-ray inspection systems and Scanning Electron Microscopes. Established in 1991, with almost 30 years of technical know-how, SEC is continuously developing the backbone of e-beam inspection equipment in Korea. 

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/15/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Happy’s Smart Factory Protocol Primer

04/29/2020 | Happy Holden, I-Connect007
The smart factory concept is built upon data interchange as the foundation. There has been much development in the area of industrial and manufacturing data protocols over the years, stretching back into the 1960s. This article by Happy Holden surveys what are considered the most common protocols in use in the electronics manufacturing industry today, including IPC-CFX/ Hermes, OML, SECS/GEM, and MAPS.

Automation War Stories From ICM Controls

04/22/2020 | I-Connect007 Editorial Team
Members of the I-Connect007 editorial team met with Andy Kadah, president of ICM Controls, and Kevin Jobsky, senior marketing manager, via teleconference on March 20, 2020. Originally, the purpose of our conversation was to discuss factory automation implementation details. Yet, we conducted the interview in the midst of a rapid-fire and wide-ranging onslaught of executive orders from the federal level on down to the local level meant to curb the spread of the coronavirus.



Copyright © 2021 I-Connect007. All rights reserved.