Rehm Invests in Seven New Apprentices for Various Roles


Reading time ( words)

The beginning of September signalled a new phase in the lives of many junior staff — the start of their apprenticeships. Seven young people have started their apprenticeships in various professions at Rehm Thermal Systems in Blaubeuren-Seißen. Two prospective industrial clerks, three mechatronics engineers, one IT specialist in the field of application development and one specialist in warehouse logistics. Even during the Covid-19 pandemic, Rehm Thermal Systems is relying on qualified, committed and motivated junior staff.

In addition to all of the technical elements, the training focuses on things like independence, creativity and teamwork. This gives apprentices the opportunity right from the start to take on responsibility and carry out small projects. For prospective mechatronics engineers, for example, a separate area has been created in which they can design and implement their own small systems.

“We are pleased to welcome our new junior staff and will do our best to provide them with instructive, varied and above all future-oriented training”, says Manuela Sebabi, training manager at Rehm Thermal Systems for commercial apprentices. “It’s always exciting to support the apprentices through their training and, in these first few years of their careers, to share all of the experience, expertise and knowledge that we as a company have realised on a daily basis for the last 30 years."

A well-founded apprenticeship and the promotion of young, committed individuals has been firmly anchored in the corporate philosophy of Rehm Thermal Systems for many years. With the new trainees, the Rehm Group now employs a total of more than 25 trainees at Rehm Thermal Systems and Rehm BlechTec in seven different professions and two dual study programmes.

The application phase for the 2021 training year has already begun. Further information can be found at www.rehm-group.com.

About Rehm Thermal Systems
Rehm is a technology and innovation leader in the state-of-the-art, cost-effective manufacturing of electronic assembly groups. It specialises in thermal system solutions for the electronics and photovoltaics industry. Rehm is a globally active manufacturer of reflow soldering systems using convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallisation of solar cells and numerous customised systems. We have a presence in all key growth markets and, as a partner with 30 years of industry experience, we are able to implement innovative production solutions that set new standards.

Share

Print


Suggested Items

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

Lorain County Community College’s Successful MEMS Program

12/07/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team had the pleasure of an extended and detailed conversation with Johnny Vanderford and Courtney Tenhover from Lorain County Community College (LCCC). Vanderford and Tenhover are at the heart of the microelectromechanical systems (MEMS) program at LCCC that is emerging as a model for a successful technical higher-education program. This conversation was lively, and the enthusiasm at LCCC is infectious, as it should be; their results are impressive.

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.



Copyright © 2021 I-Connect007. All rights reserved.