Creative Materials Introduces New Series of Epoxy Adhesives


Reading time ( words)

Creative Materials introduces a new series of anisotropically conductive B-stageable silver-filled epoxy adhesives, our 128-32 series. These products can be applied by screen-printing, dipping, and syringe dispensing. These products feature excellent adhesion to a variety of metallic contact pad compositions, as well as other substrates.

Applications for the 128-32 series include conductive splicing of ribbon cables, electrical attachment of surface-mounted devices, and bonding of flex circuits to PC boards and electroluminescent panels. The 128-32 series is especially useful in preventing shorts in applications where closely spaced contacts is a concern.  128-32FP features a finer pitch than traditional anisotropic conductive materials.  In addition, 128-32 product series offers a faster cure at lower temperatures, snap cure at higher temperatures, and longer working time. The 128-32 system features excellent thermal stability.

Other products in this series can provide custom versions specific to the target pad size and pitch.  In addition, 128-32-F series are B-stageable film versions of the product.

Share

Print


Suggested Items

Northrop Grumman: 3D Nanomaterials May Counter Gaps in Additive Supply Chain

10/22/2020 | Andy Shaughnessy, Design007 Magazine
The best technology is dead in the water if your domestic supply chain won’t support it. That was just one of the takeaways from Dr. Judy Dickson’s talk during the SMTA Additive Electronics TechXchange. In her presentation, titled “Advanced PWBs: A Collaboration Between Design, Operations, and the Supply Chain,” Dickson, a senior principal systems engineer at Northrop Grumman Mission Systems, laid out the many challenges her department faces in fielding HDI advanced packaging into the next decade. Most of these challenges are related to sourcing the necessary materials in the U.S.

Increase Traceability, Prevent Counterfeiting

08/25/2020 | I-Connect007 Editorial Team
Michael Ford, senior director of emerging industry strategy for Aegis Software and I-Connect007 columnist, speaks about the increasing importance of traceability in manufacturing and throughout the supply chain, including how it affects such areas as counterfeit components and inventory management.

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.



Copyright © 2020 I-Connect007. All rights reserved.