Niche Electronics & QCMS Select MIRTEC’s MV-6


Reading time ( words)

MIRTEC is pleased to announce that Niche Electronics Technologies & QCMS have selected MIRTEC’s MV-6 OMNI 3D AOI machine to meet their ongoing commitment to flawless manufacturing quality.  The Award-Winning MV-6 OMNI is the perfect 3D Inspection Solution to enable both facilities to achieve 100% customer satisfaction.

“Founded in 1997 Niche Electronics is a solutions driven Electronics Manufacturing Service (EMS) Company, supplying PCB and electro-mechanical assemblies to our customers in the Defense, Aerospace and Industrial markets. Due to increasing circuit density and complexity, our Quality Team recognized the need for 3D Inspection Technology. After evaluating several systems, we determined that MIRTEC’s MV-6 OMNI platform was the best solution to meet our customer’s high-quality standards. Immediately after the acquisition of our second facility our very first capital purchase at the new location was a second MV-6 OMNI machine. These systems have proven to be a solid platform and a key contributor to the growing success of both of our locations.” Frank Bowman - President, Niche Electronics Technologies and QCMS.

“A growing number of manufacturers are relying upon MIRTEC’s Technologically Advanced 3D SPI and AOI solutions to help increase profitability by improving production yields and reducing costly rework.” said Brian D’Amico, President of MIRTEC Corp. “We are extremely pleased to have been selected by Niche Electronics & QCMS to meet their high-quality production standards.  We look forward to a long and prosperous relationship between our organizations.”

MIRTEC’s Award-Winning MV-6 OMNI 3D AOI Machines are configured with the company’s exclusive OMNI-VISION® 3D Inspection Technology which combines a 15 Mega Pixel CoaXPress Camera System with MIRTEC’s revolutionary Digital Tri-Frequency Moiré 3D Technology to provide precision inspection of SMT devices on finished PCB assemblies. This proprietary system yields precise height measurement used to detect lifted component and lifted lead defects as well as 3D solder fillet inspection post reflow.  Fully configured the MV-6 OMNI machines feature four (4) 10 Mega Pixel Side-View Cameras in addition to the 15 Mega Pixel CoaXPress Top-Down Camera and an Eight (8) Phase COLOR Lighting System.

 

Share

Print


Suggested Items

Tech 2 Tech: KYZEN’s Short Technical Sessions a Big Hit

01/20/2021 | Nolan Johnson, I-Connect007
Nolan Johnson gets an update from Tom Forsythe on KYZEN’s Tech 2 Tech sessions. These brief 15-minute sessions were set up during the pandemic by KYZEN for customers, prospects, and new engineers around cleaning, and have since found traction with their manufacturers, reps and distributors.

This Month in SMT007 Magazine—Continuous Improvement: As Simple as X = Xc – 1

01/04/2021 | I-Connect007 Editorial Team
X=Xc – 1 is a conceptual equation for continuous improvement. You define X and work to reduce it by a factor of 1. This could be one work hour, one process step, one day less in a cycle, and so on. We recently met with Dr. Ron Lasky to discuss the concept of X=Xc – 1 and get his advice on generating enthusiasm among readers and the next generation about continuous improvement. As this discussion illustrates, many process improvements are small in scale, not yearlong, major efforts.

Top 10 Most-Read SMT Articles of 2020

12/31/2020 | I-Connect007
As 2020 comes to a close, the I-Connect007 Editorial Team takes a look back at its most read articles. Here are the top 10 reads in SMT from the past year.



Copyright © 2021 I-Connect007. All rights reserved.