Part 7 of Siemens’ Digital Twin Webinar Series: Optimizing Inspection and Test Engineering


Reading time ( words)

I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing.” Each of the 12 segments can be viewed in about five minutes.

Have you ever wondered what digital twin is, how it's used, and its benefits? Are you interested in learning ways to optimize and streamline how data flows from design, production planning, process engineering, and manufacturing? Then this micro webinar series is for you!

Throughout this 12-part series, Jay Gorajia from Siemens Industries Software describes how to leverage the digital twin concept—from design to production planning and process engineering—through manufacturing execution and supply chain. The goal of the series is to define a blueprint for organizations seeking to digitalize and optimize their design to manufacturing processes and manufacturing operations.

In part 7, Gorajia’s discussion centers on how to “Optimize Inspection and Test Engineering.” He explains, “Driving the best inspection and test strategy requires extensive processing to achieve the best solution. However, test strategy is a lot of ‘art’ mixed in with the science, and any Test Analysis and Programming solution must be able to support that mix.” In this segment, he will focus on building the best inspection and test outputs, leveraging learning libraries and allowing some “art.”

Expert Gorajia has worked with hundreds of design and manufacturing organizations around the world, driving real improvements in cost, throughput, and quality over his 27 years in the industry. Viewers will learn how best to optimize throughput, cost, and quality as organizations embark on the digitalization journey.

The entire digital twin webinar series can be viewed in just over an hour and covers a comprehensive range of hot topics, including insights from manufacturing to improve and optimize future designs, as well as how to digitalize our factory to optimize even further.

Got five minutes? Click here and start watching “Implementing Digital Twin Best Practices From Design Through Manufacturing” today.

I-007eBooks and I-007e Micro Webinars: Your premier educational resource for circuit board design, manufacture, and assembly. I-Connect007 takes the on-demand webinar to a new level. A perfect companion to our I-007eBook series, these bite-sized webinars are available for free viewing exclusively at I-Connect007.

Additional Resources

Share

Print


Suggested Items

What Makes a Good Process Engineer?

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Tuan Tran, director of customer solutions at Green Circuits, about what makes a successful process engineer. They also discuss a typical day in the life of a process engineer—from pre-manufacturing through post-DFM, for process improvement. As Tuan points out, there are a variety of paths to becoming a great process engineer.

Implementing Digital Twin Best Practices From Design Through Manufacturing Webinar Review

01/27/2021 | Dana Korf, Korf Consultancy
I-007e recently released a highly informative series of short webinars called Implementing Digital Twin Best Practices from Design Through Manufacturing presented by industry expert Jay Gorajia, the Director of Siemens Global Digital Manufacturing Services. The webinar is an excellent overview how data that is generated using a digital twin model can be effectively utilized to improve business execution using the Siemens tool suite.

Book Excerpt: The Printed Circuit Assembler’s Guide to Smart Data, Chapter 1

12/30/2020 | Sagi Reuven and Zac Elliott, Siemens Digital Industries Software
Accurate data is required to adjust processes and to ensure quality over time. This is difficult because not all data is in the same format, and not all sensors perform the same over time. How do you know what the best data to collect is and how to filter out the junk data from useful or smart data? This is not an easy task when the interfaces to data collection sources are complex, and they do not speak the same language, often requiring the vendor’s help to get data out of the machine and then spending time normalizing the data to turn it into something useful. This is a challenge for companies trying to set up a custom data collection system themselves.



Copyright © 2021 I-Connect007. All rights reserved.