AIM Solder Announces Addition of New Manufacturing Facility in Malaysia


Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce the addition of its new ISO 9001 certified facility in Malaysia.

AIM Solder’s new 12,000 sq. ft. plant will offer locally made solder paste, liquid flux, bar solder, cored and solid wire. The fully-staffed facility will also provide sales support and customer service alongside AIM’s unparalleled technical support to the company’s expanding customer base in Malaysia.

“Due to the support of our customers and partners globally, AIM has been growing steadily throughout the past decade.  In recent years, we have doubled the sizes of our operations in Europe and North America and have expanded our operations in Asia. The addition of the new facility in Penang strengthens our commitment to support the growing demand for electronic assembly solutions in Southeast Asia,” said David Suraski, Executive Vice President, Assembly Materials Division.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.