Indium Corporation Forms Strategic Partnership with Valuetronics


Reading time ( words)

Indium Corporation and Valuetronics International have formed a strategic partnership to serve customers in the Americas with its cored wire, rework fluxes, and bar solder products. 

The partnership with Valuetronics, a well-known distributor of test and laboratory equipment markets, will help bring Indium Corporation’s proven materials to hand assembly and rework customers. 

“We are eager to work with Valuetronics to continue to deliver our high-quality products and technical expertise to our customers in the Americas,” said Greg Hayes, Southeast Regional Manager and Americas Distributor Manager.

Valuetronics was founded in 1992, as a seller and buyer of used test equipment and later grew to include several distribution lines of new equipment. A supplier of electronic test equipment to large, medium, and small businesses, Valuetronics stocks thousands of instruments at their Elgin, Ill. facility with a growing customer base of more than 100,000 global contacts.

Indium Corporation is a premier materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.