Lorain County Community College’s Successful MEMS Program
December 7, 2020 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
The I-Connect007 editorial team had the pleasure of an extended and detailed conversation with Johnny Vanderford and Courtney Tenhover from Lorain County Community College (LCCC). Vanderford and Tenhover are at the heart of the microelectromechanical systems (MEMS) program at LCCC that is emerging as a model for a successful technical higher-education program. This conversation was lively, and the enthusiasm at LCCC is infectious, as it should be; their results are impressive.
Nolan Johnson: Can you please introduce who you are and what you do?
Johnny Vanderford: I’m an assistant professor and coordinator of the MEMS program at LCCC. I am also the director of LCCC’s new Manufacturing Electronics and Rework Institute for Training (MERIT). The content of our degree and institute is primarily focused on training with hands-on skills in electronics manufacturing.
Johnson: We need a lot of that in this industry.
Vanderford: I couldn’t agree more.
Courtney Tenhover: I’m a program developer at LCCC. I work on the earn-and-learn side of the program with Johnny, including getting job placements for students, working with employers to understand their needs, and pairing students and employers together. I have an HR and project management background, so bringing that to this program helps me work with employers on the HR side. Johnny is the technical expert.
Vanderford: My background is in electrical engineering. I have a master’s degree from Northern Illinois University. A primary part of my degree is based on electronic materials and hybrid board manufacturing, including a variety of different types of PCBs. The degree we teach is microelectronics manufacturing. It’s how PCBs are manufactured, assembled, repaired, reworked, and designed with some additional skills in microelectronic packaging, such as wire bonding, die attach, and even a little bit of some chemical fabrication of silicon wafers and PCBs.
The degree is heavily focused on career placement in electronics manufacturing. It is designed to be a workforce generator to help fill the pipeline. We require every student in our program to have accumulated 600 hours of paid workforce experience, or the student doesn’t get their degree, and the community college won’t get state share of instruction (i.e., additional funding for continuing) for helping students get degrees. We all know someone who has a degree in one thing, but they’re working in a completely separate field. We have tailored the program using input and feedback from our industry supporters so that we can train students in necessary electronics manufacturing skills, such as hand soldering, hot air rework, loading pick-and-place systems, and stencil printers with solder paste.
Students can get trained at the college while they’re taking classes, and they get employed at companies working part-time from one to three years while they continue toward their bachelor’s degree. My role is to give them the technical content, and Courtney’s role is to connect the students with the companies on an HR level. When we go to companies, I talk engineering with engineers. Courtney finds out what the job needs are, gets those job requests to our students and alumni, gathers the resumes of those interested students and alumni, and sends them back to the company’s HR line. That way, the engineers tailor the technical content to the program, and the company has a steady flow of workforce that is ready to begin working.
To read this entire interview, which originally appeared in the December 2020 issue of SMT007 Magazine, click here.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.