EVS Introduces New Large Pot Solder Recovery System with Sealed Cabinet


Reading time ( words)

EVS International, the leader in solder recovery, introduces the new EVS18KLF solder recovery system. The EVS 18KLF has a larger 18kilo/40lbs pot, allowing customers to recover more dross and producing a faster ROI. Users can quickly recover up to 80 percent of pure solder with a higher ROI from the waste dross.

EVS has continually improved the performance of the EVS units and the new EVS 18KLF is no exception. The solder recovery system has a touchscreen display, and like all EVS systems, is totally automatic.

EVS’ new patented technology provides a clean ingot bar as it filters the solder through gauze and the recovery rate is very high, achieving up to 80 percent solder from the dross.

The EVS 18KLF features a totally sealed cabinet, enclosing the dross bucket and fume extraction. This area is now totally sealed.

The revolutionary Tilting Pot Mechanism allows engineers to dispense with the space-consuming twin opposed air rams and door. Inverting and rotating dross/solder pot and a novel hot air-activated auto drain tap creates the solder ingots.  

The simple but ruggedly designed unit is highly ISO14001 compatible as it lives by the ISO mantra of reduce – reuse – recycle, enabling customers to reduce solder consumption by up to 50+ percent, an unheard of savings in the electronics production industry.

Share

Print


Suggested Items

An EMS Perspective on Inventory Management

08/27/2020 | I-Connect007 Editorial Team
Foad Ghalili of Epoch International discusses the inventory management practices the company has in place between its two facilities in Fremont, California, and Dalian, China; and how upgrading to an electronic management system made maintaining a much larger inventory possible.

This Month in SMT007 Magazine: How Engineers Can Use SPI Tools for Verification

05/06/2020 | Nolan Johnson, I-Connect007
Koh Young’s Ray Welch and Brent Fischthal detail how engineers can work with SPI tools to verify how small they can go in component size with their solder paste application, and how the company’s SPI equipment is helping not only to verify but also to help drive the development collaboration between solder paste and stencil printer manufacturers, and inspection tools and software.

The Foundation of Industry 4.0

04/15/2020 | Oren Manor, Mentor, a Siemens business
When adopting IoT solutions, start with three main considerations. First, assess which parts of the production cycle can be automated and/or monitored most effectively with IoT devices connected to an analytics platform. IoT technology should be matched to the production cycle of your operation.



Copyright © 2021 I-Connect007. All rights reserved.