EVS Introduces New Large Pot Solder Recovery System with Sealed Cabinet


Reading time ( words)

EVS International, the leader in solder recovery, introduces the new EVS18KLF solder recovery system. The EVS 18KLF has a larger 18kilo/40lbs pot, allowing customers to recover more dross and producing a faster ROI. Users can quickly recover up to 80 percent of pure solder with a higher ROI from the waste dross.

EVS has continually improved the performance of the EVS units and the new EVS 18KLF is no exception. The solder recovery system has a touchscreen display, and like all EVS systems, is totally automatic.

EVS’ new patented technology provides a clean ingot bar as it filters the solder through gauze and the recovery rate is very high, achieving up to 80 percent solder from the dross.

The EVS 18KLF features a totally sealed cabinet, enclosing the dross bucket and fume extraction. This area is now totally sealed.

The revolutionary Tilting Pot Mechanism allows engineers to dispense with the space-consuming twin opposed air rams and door. Inverting and rotating dross/solder pot and a novel hot air-activated auto drain tap creates the solder ingots.  

The simple but ruggedly designed unit is highly ISO14001 compatible as it lives by the ISO mantra of reduce – reuse – recycle, enabling customers to reduce solder consumption by up to 50+ percent, an unheard of savings in the electronics production industry.

Share

Print


Suggested Items

This Month in SMT007 Magazine—Continuous Improvement: As Simple as X = Xc – 1

01/04/2021 | I-Connect007 Editorial Team
X=Xc – 1 is a conceptual equation for continuous improvement. You define X and work to reduce it by a factor of 1. This could be one work hour, one process step, one day less in a cycle, and so on. We recently met with Dr. Ron Lasky to discuss the concept of X=Xc – 1 and get his advice on generating enthusiasm among readers and the next generation about continuous improvement. As this discussion illustrates, many process improvements are small in scale, not yearlong, major efforts.

Top 10 Most-Read SMT Articles of 2020

12/31/2020 | I-Connect007
As 2020 comes to a close, the I-Connect007 Editorial Team takes a look back at its most read articles. Here are the top 10 reads in SMT from the past year.

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.



Copyright © 2021 I-Connect007. All rights reserved.