Ersa to Offer Demos in Interactive Virtual Showrooms during APEX Virtual EXPO


Reading time ( words)

Kurtz Ersa Inc., the world leader of electronics production equipment, announced plans to participate in the 2021 IPC APEX Virtual EXPO, scheduled to take place March 9-11, 2021 online at www.ipcapexexpo.org. Ersa has upgraded its demo/application centers to interactive virtual showrooms where the team will give customers in depth and personalized equipment demonstrations for wave soldering, reflow soldering, selective soldering, rework equipment, I4.0 connectivity and more. The company will highlight the EXOS 10/26, Ersa VERSAEYE and and HR 600 XL during the virtual event.
Ersa's EXOS 10/26 is a convection reflow soldering system with 22 heating and 4 cooling zones as well as a vacuum chamber after the peak zone, to remove voids in the solder contact areas between component and PCB surfaces. In addition to its extraordinary process reliability, the system impresses with its extreme ease of maintenance.

Ersa_VERSAEYE.jpgThe Ersa VERSAEYE module enables the optimal documentation of solder joint quality on the basis of your individual quality requirements.  Incorportaing it into Ersa’s industry leading VERSAFLOW selective soldering systems, the VERSAEYE is optimized for the inspection of THT solder joints.  Through the use of up to nine camears it can detect detect different wetting prob-lems, solder bridges, solder balls or missed out pins.

Ersa_HR-600XL.jpgWith the Ersa HR 600 XL it is possible to professionally rework BTC components on big board assemblies. Boasting a heated area of 24 x 24" and a PCB thickness of up to 10 mm opens up rework capabilities in the segments of telecommunication, network and infrastructure. The high precision repair process is ideal for desoldering, placement and soldering of all types of surface mounted devices (SMD): BGA, metallic BGA, CGA, BGA socket, QFP, PLCC, MLF, etc.

For more information about Kurtz Ersa Inc., visit www.ersa.com.

Share

Print


Suggested Items

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.

What Makes a Good Process Engineer?

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Tuan Tran, director of customer solutions at Green Circuits, about what makes a successful process engineer. They also discuss a typical day in the life of a process engineer—from pre-manufacturing through post-DFM, for process improvement. As Tuan points out, there are a variety of paths to becoming a great process engineer.

Super Dry: Increasing Component Storage Needs

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Super Dry’s Richard Heimsch about how the need for dry storage solutions has increased throughout the pandemic, including further demands for traceability and automation capabilities.



Copyright © 2021 I-Connect007. All rights reserved.