KIC to Exhibit at 2021 IPC APEX Virtual EXPO


Reading time ( words)

KIC is pleased to announce its participation in the 2021 IPC APEX Virtual EXPO, scheduled to take place March 9-11, 2021 online at www.ipcapexexpo.org. 

Connectivity is a critical and mandatory part of implementing smart factory capabilities, gaining value and efficiencies in your manufacturing execution. KIC, the market leader in solutions and technologies for reflow soldering process management, has the most robust and flexible connectivity capabilities when addressing manufacturing requirements for Reflow Process Inspection. 

KIC’s capabilities include automated reflow recipe and profile setup for NPI, process optimization, full process/product traceability and connectivity to any factory system. The company offers real-time automation with inline reflow process inspection and process control with auto-changeover.  

KIC’s connectivity supports IPC-CFX-2591, SECS/GEM and Hermes standards. Third party software/MES partners include Aegis, Mentor, iTAC, Cogiscan, ViTrox V-One, and more. Generic formats and protocols include: XML, JSON, CSV, TXT, MQTT, HTTP, AMQP, TCP/IP and COM.

Move toward the future of Smart Factory integration with Reflow Process Inspection, gaining line connectivity, flexible production, traceability, data analytics, process transparency/control, and real-time insight.

Share

Print


Suggested Items

What Makes a Good Process Engineer?

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Tuan Tran, director of customer solutions at Green Circuits, about what makes a successful process engineer. They also discuss a typical day in the life of a process engineer—from pre-manufacturing through post-DFM, for process improvement. As Tuan points out, there are a variety of paths to becoming a great process engineer.

Implementing Digital Twin Best Practices From Design Through Manufacturing Webinar Review

01/27/2021 | Dana Korf, Korf Consultancy
I-007e recently released a highly informative series of short webinars called Implementing Digital Twin Best Practices from Design Through Manufacturing presented by industry expert Jay Gorajia, the Director of Siemens Global Digital Manufacturing Services. The webinar is an excellent overview how data that is generated using a digital twin model can be effectively utilized to improve business execution using the Siemens tool suite.

Book Excerpt: The Printed Circuit Assembler’s Guide to Smart Data, Chapter 1

12/30/2020 | Sagi Reuven and Zac Elliott, Siemens Digital Industries Software
Accurate data is required to adjust processes and to ensure quality over time. This is difficult because not all data is in the same format, and not all sensors perform the same over time. How do you know what the best data to collect is and how to filter out the junk data from useful or smart data? This is not an easy task when the interfaces to data collection sources are complex, and they do not speak the same language, often requiring the vendor’s help to get data out of the machine and then spending time normalizing the data to turn it into something useful. This is a challenge for companies trying to set up a custom data collection system themselves.



Copyright © 2021 I-Connect007. All rights reserved.