LACROIX’s Electronics Activity Introduces Component Miniaturisation into Series Production


Reading time ( words)

LACROIX manufacturing site based in Willich, Germany, is setting out to produce assemblies in higher quantities reliably and consistently. 

“Sooner or later, you will have to address the trend of incorporating more compact assemblies. I believe the current component designs will soon die out, this primarily due to the increasing multifunctionality of electronic devices which necessitates a more compact design for assemblies,” Peter Sommer, Sales Director at LACROIX – Electronics activity.

Matthias Holsten, change consultant for the electronics branch, sees integrating components with such extraordinarily small designs into series production as being problematic for three reasons: “Getting the size right in mass production means that the entire manufacturing process has to be engineered for it. Applying solder paste properly here requires precision work, as does picking up and placing barely visible components, not to mention the extremely delicate process of soldering itself. Making sure that the process is reliable is the real problem.” In his opinion, this is why many EMS service providers still shy away from upgrading and converting their machinery and drag their feet. “However, if EMS service providers don’t get on board in time, their production will soon become uneconomical,” said Holsten, clearly stating his point of view.

Investing in Machinery

“We see a promising market for microsystems, such as those used in camera systems in automation technology. However, the entire production sector with its increasing use of automation in factories also offers us and the entire industry the chance to establish a reliable business segment in the long term,” Peter Sommer.

Following this trend, LACROIX is introducing the use of miniature components in series production with new machinery. Indeed, two new ASM placement machines have been operating in series production since early February of this year.

“This provides more than just the required process reliability. With the shorter assembly and changeover times, we also have noticeably better economic viability and are well positioned with regard to the competition,” said the certified electrical engineer with confidence.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/14/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.



Copyright © 2021 I-Connect007. All rights reserved.