Reading time ( words)
Effective inspection is the key to advancing the quality of the manufacturing operation. With the benefit of AI to spot the early signs, any trends away from optimum can be resolved before they become problems. MIRTEC President Brian D’Amico explains.
Visit realtimewith.com now for all the interviews produced by I-Connect007 in partnership with the IPC at this year's event. Later this month, watch for Real Time with...IPC APEX EXPO 2021 Show & Tell 2021, our celebrated special annual post-show magazine.
Watch the Real Time with… IPC APEX EXPO 2021 interview with Brian D'Amico now.
Share
PrintSuggested Items
KIC Adds Wave Process Inspection to Product Line
03/30/2021 |
Real Time with...IPC
Miles Moreau, general manager for EMEA, Americas & Australia at KIC, shares some details on the new Wave Process Inspection (WPI) solution that KIC is currently rolling out. This solution brings real-time process control capabilities to wave soldering equipment, adding and extending capabilities.
BTU Discusses Time-Saving New Technologies
03/24/2021 |
Real Time with...IPC
Nolan Johnson and BTU's Rob DiMatteo drill down into the company's new capabilities in vacuum reflow and new technology for flux management, a system that greatly reduces downtime for cleaning and maintenance, among other benefits.
NovaCentrix Expands Solder Capabilities
03/19/2021 |
Real Time with...IPC
Stan Farnsworth of NovaCentrix discusses how the company has expanded into electronics manufacturing in the past year with its photonic curing and soldering tools.
