CyberOptics’ SQ3000 Multi-Function System Showing at NEPCON China


Reading time ( words)

CyberOptics® Corporation, a leading global developer and manufacturer of high-precision 3D sensing technology solutions, will exhibit at NEPCON China, scheduled to take place April 21-23, 2021 at the Shanghai World Expo Exhibition & Convention Center. The company will showcase the SQ3000™ Multi-Function for AOI, SPI and CMM.

CyberOptics’ SQ3000 Multi-Function system can identify critical defects and measure critical parameters, providing a superior process control solution for effective yield management. In addition to AOI and SPI applications, highly accurate coordinate measurements can be attained faster than a traditional Coordinate Measurement Machine (CMM) – in seconds, not hours.

Powered by proprietary Multi-Reflection Suppression™ (MRS™) sensor technology, the 3D SQ3000 all-in-one system offers an unmatched combination of high speed, high resolution and high accuracy. The MRS sensor meticulously identifies and rejects reflections caused by shiny components making it an ideal technology solution for a wide range of applications with stringent requirements. The Ultra-High Resolution MRS sensor option delivers superior performance ideally suited for socket metrology, micro and mini LED, microelectronics and other applications where an even greater degree of accuracy and inspection reliability is critical.

The world’s first in-line CMM includes CyberCMM™, an extensive software suite for metrology grade measurements on all critical points. In addition, the latest 3D AOI software enables ultra-fast programming capabilities, auto tuning and enhancements that significantly speed setup, simplify the process, reduce training efforts and minimize operator interaction.

About CyberOptics

CyberOptics Corporation is a leading global developer and manufacturer of high-precision 3D sensing technology solutions. CyberOptics’ sensors are used for inspection and metrology in the SMT and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the Company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe. 

For more information, visit www.cyberoptics.com.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/15/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”



Copyright © 2021 I-Connect007. All rights reserved.