Reading time ( words)
Miles Moreau, general manager for EMEA, Americas & Australia at KIC, shares some details on the new Wave Process Inspection (WPI) solution that KIC is currently rolling out. This solution brings real-time process control capabilities to wave soldering equipment, adding and extending capabilities.
Visit realtimewith.com now for all the interviews produced by I-Connect007 in partnership with the IPC at this year's event. Check out Real Time with...IPC APEX EXPO 2021 Show & Tell 2021, our celebrated special annual post-show magazine.
Listen to this Real Time with… IPC APEX EXPO 2021 interview with Miles Moreau now.
I-Connect007 Editorial Team
There has not been a time in recent memory when the U.S. legislative body is putting as much focus on the microelectronics industries. One bill, the CHIPS Act, was signed into law last year. A new bill introduced this year seeks to allocate funding for printed circuit board fabrication. In this exclusive interview, our team spoke with Travis Kelly, CEO of Isola Group and president of the Printed Circuit Board Association, and U.S. Rep. Blake Moore (R-Utah), who has co-sponsored the bill now before the House. Travis and Blake both express optimism about onshoring domestic production, but the realities of the legislative calendar may pose some risks.
Randy Cherry, IPC
If you work for a U.S. defense prime contractor, do you have concerns that the controlled unclassified information (CUI) for your printed circuit boards, your printed circuit board assemblies, and your cable and wire harnesses is safe? What about the design and the development process for your products? Is the controlled technical information (CTI) safe and protected? Are the suppliers that your company selected maintaining a quality system, a supply chain risk management process, a security system to protect products and services from unauthorized access, and a Chain of Custody policy for electronic and physical materials?
Barry Matties and Andy Shaughnessy, I-Connect007
IPC Mexico has been growing for the past few years, and it’s no wonder: Mexico has become a major hub in the world of PCB manufacturing, spurred in part by reshoring as companies pulled work back from China during the pandemic. As the country’s maquiladoras thrived, IPC began expanding the Mexican educational and training operations, and the group recently named Lorena Villanueva as director of IPC Mexico. Andy Shaughnessy and Barry Matties recently spoke with Lorena and IPC Vice President of Education David Hernandez about IPC Mexico’s growth, as well as the office’s plans to provide PCB manufacturers the training resources they need to succeed.