SHENMAO Establishes Testing Laboratory in Taiwan - Cheetah Inspection

Reading time ( words)

SHENMAO is pleased to announce that it has established an independent testing laboratory in Taiwan called Cheetah Inspection Inc. The ISO/IEC 17025 approved testing laboratory is located in Hsinchu, and builds upon SHENMAO’s 48 years of packaging and assembly experience.

Cheetah Inspection will focus on materials, chemical, failure analysis, and reliability testing of IC packages and PCBAs. For IC packages, the independent testing lab can design and make the PCB as test vehicle, assemble it in the SMT and dip process, run accelerated aging tests such as TCT, and perform failure analysis.

Watson Tseng, General Manager at SHENMAO America, commented, “SHENMAO has been supplying solder materials for 48 years. We know the soldering process very well and will utilize this experience to provide testing and troubleshooting services to the industry at Cheetah Inspection.” 

SHENMAO has successfully been approved by many international well-known electronic manufacturers. The company strives to offer the best quality without compromising cost and time-to-market while providing maximum value to all customers.



Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/15/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.

Copyright © 2021 I-Connect007. All rights reserved.