1 Click SMT to Showcase Selective Soldering Systems at NEPCON China


Reading time ( words)

1 Click SMT Technology Co., ltd announced plans to exhibit at NEPCON China, scheduled to take place April 21-23, 2021 at the Shanghai World Expo Exhibition & Convention Center. The company will showcase the MAS-i2 inline selective soldering machine and Ant-i2 offline selective soldering machine. The Falcon Inline AOI System ULDC460XL NG/OK Loader & Unloader 2 in 1 also will be introduced at the show for the first time.

The MAS-i2 has a three-section conveyor system: fluxing, preheating and soldering. While one board is in soldering, another is in preheating and the third board is in fluxing saving time and enhancing production.

The Mas-i2 can equip two fluxer valves, either two of the same valve or two different valves. For example, two drop jet valves enable customers to double production. Or one drop jet valve and one micro-spray valve, enabling the use of two different fluxes simultaneously.

For soldering, the system is equipped with two individual solder pots in two individual Z-axis. The soldering area can accommodate PCBs up to W450 x L508mm (18" x 20") for two nozzles individually, or W235 x L508mm (9.25" x 20") for two nozzles in parallel. As a result, customers can program the system to use only one solder pump, two simultaneously to double the speed, or use one solder pump with a larger nozzle first and then another solder pump with a smaller nozzle. 

The Ant-i2 includes two drop jet fluxers, a bottom preheating zone and optional top preheating zone, and one solder pot with two individual selective wave tunnels.

It can handle two max 350mm x 215mm boards at the same time, doubling production capacity for high volume offline production. If only use one fluxer/one solder nozzle, it can handle max 350mm x 450mm, high flexibility for big board.

The Ant-i2 comes with software based on the Windows 10 operating system for easy programming and good traceability, live on-camera viewing of the soldering process, auto wave height calibration, one-button flux nozzle auto cleaning function, N2 closed-loop heat-up, flux level alarm, solder level alarm and more as standard. Optional features include N2 purity monitoring, N2 flow monitoring, flux quantity monitoring, and more.

1 Click SMT has established a strong worldwide distribution channel. The company has well-trained engineers to support its customers in any location.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/14/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.



Copyright © 2021 I-Connect007. All rights reserved.