JAVAD Completes EMS AS9100D / ISO9001-2015 Recertification Audit


Reading time ( words)

JAVAD EMS (JEMS), a leading global EMS company that provides low to medium volume, high-mix applications, announces that it has completed the recertification audit of its AQMS system in compliance with AS9100D:2016 with zero non-conformances at its facility in Silicon Valley. Since upgrading to the new standard in 2018, which incorporated ISO9001:2015 and AS9100D:2016 into a single standard for auditing purposes, this marks the company’s third year in a row with zero non-conformances.

Greg DelBrocco, Manager of Quality and Compliance, stated, “This is a spectacular achievement for all of us at JAVAD EMS! This just shows how much emphasis we put into our AQMS. The five-day audit was completed seamlessly, and again, without any non-conformities found during this intensive complete system audit! A true team effort from top management all the way down!”

It is necessary for AS9100 to undergo periodic revisions that make it efficient for its users and safe for the consumers using their products. SAE AS 9100D:2016– Quality Management Systems – Requirements for Aviation, Space and Defense Organizations is the fourth version of the standard, released in September 2016. The primary need for the switch to the updated AS 9100D-2016 standard is its inclusion of the latest revision of the general international standard for quality management system requirements: ISO 9001.

Gary Walker, Vice President of JEMS stated: “We’re very happy to have consecutive audits without any issues. We build some very challenging products for the Mil-Aerospace industries, and this just confirmed why we have been chosen and how we deliver error free products to them on a consistent basis. To be able to support these needs in a low- to medium-volume high-mix environment says a lot for the quality system we have in place as well as for all the people that work here and investments we have made in equipment and software across our entire factory. As a result, all of our customers, whether they are Mil-Aero or not, get these very high-quality standard builds.”

ISO 9001:2015 was released almost exactly one year prior to the new revision of AS 9100. Important changes to this document include the addition of the Plan-Do-Check-Act (PCDA), a greater emphasis on risk management, and a focus on management responsibility in carrying out the quality management process.

JEMS has more than 40,000 ft.2 of manufacturing space that it continually updates to the highest standards of electronic manufacturing services, communication, client support, employee comfort, and training.

Share




Suggested Items

Exploring High Density With Axiom

05/06/2022 | I-Connect007 Editorial Team
Nolan Johnson and Barry Matties talk with Axiom’s Rob Rowland and Kevin Bennett about the current high-density challenges facing EMS manufacturing. In this interview, Bennett and Rowland zero in on component packaging and feeder technology as critical areas in need of improvement.

The Reality of Regulated Manufacturing

04/12/2022 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Ryan Bonner, CEO of DEFCERT, about government regulations for data and cybersecurity. A key component of moving to a digital factory will be to ensure security of the data required to operate a digital factory, and most importantly, customer design data.

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.



Copyright © 2022 I-Connect007. All rights reserved.