AIM Solder Brings New Low-Voiding, No Clean Solder Paste to Productronica


Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that they will feature their new low-voiding, no clean paste along with their full line of solder assembly materials at Productronica, scheduled to take place on November 16th-19th, 2021 at Messe München in Munich, Germany.

The company will launch its newly developed solder paste engineered to solve one of the industry’s most difficult challenges for BGA and BTC packages.  AIM studies show that solder joint reliability and thermal dissipation concerns are significantly reduced with its new no clean paste.  Be sure to follow AIM on social media for more news on this exciting new development.

AIM will also highlight its REL22™ and REL61™ alloys and NC273LT low temperature solder paste.  When thermal exposure during the assembly process is a limitation, NC273LT is an excellent RoHS compliant replacement. AIM’s REL22 improves product survival in extreme thermal exposure operating environments such as under-hood automotive, avionics/aerospace and LED lighting. REL61 is ideally suited for industries which require a cost-effective alternative to SAC305 with no loss of processing performance or durability. 

To discover all of AIM’s products and services, visit us at Productronica in Hall A4 Stand 420 for more information and to speak with one of AIM’s knowledgeable staff members.

 

Share




Suggested Items

Passing the Test With SMTA’s Rob Boguski

09/14/2022 | Andy Shaughnessy, I-Connect007
I recently spoke with Rob Boguski, president of Fremont, California-based Datest and an SMTA vice president and board member. Rob explained why today’s test customers are asking for more information than the traditional pass/fail, offers a preview of SMTA International, and gives an update on SMTA’s planning strategy for the next five years.

Four Silver Linings in the Stormy Clouds of Pandemic, Supply Chain, and Inflation

09/14/2022 | Dr. Ronald C. Lasky, Indium Corp.
It may be difficult to see any bright spots in the current and recent economic situation. We have all experienced the devastation of the pandemic, supply chain issues, and most recently, inflation. However, as a senior technologist for an international materials supplier (Indium Corporation) and a professor of engineering at an Ivy League research university (Dartmouth College), I offer these four silver linings for those of us in the electronics industry.

Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells

07/26/2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics Solutions
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics.



Copyright © 2022 I-Connect007. All rights reserved.