LeeMAH Electronics Selects Juki’s G-Titan Screen Printer


Reading time ( words)

Juki Automation Systems (JAS), Inc., a world-leading provider of automated assembly products and systems and subsidiary of Juki Corporation, is pleased to announce that LeeMAH Electronics purchased a new G-Titan Screen Printer with auto dispensing. The system was installed at the LeeMAH Electronics Dallas, TX facility and the sale was facilitated by Scott Fillebrown, Principal at Southwest Systems Technology.

LeeMAH Electronics offers manufacturing and test solutions to OEMs with high-mix and low-medium volume needs. The company offers customer-focused strategies with its California and Texas locations that total more than 140,000 ft2.

The new G-Titan Screen Printer is equipped for I4.0, lights-out manufacturing and quality print control. Standard features include stencil inspection, solder paste rolling measurement, stencil flattener, support block crash prevention, and automatic solder paste dispense (500g jar). 

The G-Titan features SPI closed-loop communication. The smart SPI closed-loop function provides SPI detection information to the printer to auto adjust and offset printing conditions. This is currently compatible with major SPI manufacturers.

The automated solder paste dispensing reduces production costs by reducing production personnel, dispensing the paste directly from the jar. It extends the solder paste viscosity and maximizes the solder paste lifespan. Additionally, exposure to air is reduced, minimizing issues from improper storage. This also reduces human errors and the chance of mixing old and new solder pastes together.

Share

Print


Suggested Items

ProMetrics: An Easy, Smart Solution

01/05/2022 | I-Connect007 Editorial Team
Rehm's Michael Hanke speaks about the product on process and the advantages of live process monitoring with ProMetrics, Rehm’s newest monitoring tool, which is brand new and unique in the market. Users say that it’s easy to use and, more importantly, that it provides the security in a system they are looking for.

Mycronic is Bullish on Data-Driven Production

12/20/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Mycronic’s Clemens Jargon and Göran Frank about data-driven production technology and strategies. With the introduction of new data-driven software, Mycronic has made monitoring the line easier to use, faster to learn, and more purposeful. They discuss the company’s plans to drive competition and improve customer engagement. "Everything in the production line needs to be rationally analyzed based on data," says Jargon. "Therefore, it is so important to collect good data, because then we can analyze it and continuously improve the performance of lines."

SMTAI 2021: Rob DiMatteo Turns Up the Heat at BTU

12/15/2021 | Nolan Johnson, I-Connect007
At SMTA International 2021, Nolan Johnson spoke with Rob DiMatteo of BTU International about the current shift in market drivers, pain points from customers, and what he expects to see in the near future. Chip shortages and port delays are just two of the challenges facing BTU’s customers. As general manager of BTU, DiMatteo wants his company to excel at customer service despite these challenges. He also previews a new flux management technology for keeping reflow ovens extremely clean, calling it a significant breakthrough.



Copyright © 2022 I-Connect007. All rights reserved.