CyberOptics: The Confluence of PCB and Semiconductor in Inspection Systems


Reading time ( words)

Dr. Subodh Kulkarni talks to Nolan Johnson about CyberOptics' advancements in metrology inspection applications—especially for highly reflective surfaces—and how semiconductor inspection and PCB inspection are continuing to converge.

Listen to this Real Time with… SMTAI 2021 interview with Subodh Kulkarni now.

If you didn’t make it to SMTA International in Minneapolis, don’t worry. We have interviews with the SMT segment’s top engineers and managers. Visit realtimewith.com now for all the interviews produced by I-Connect007 in partnership with SMTA at this year's event.

Share




Suggested Items

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.

Real Time with... IPC APEX EXPO 2022: Smart Factories Demand Total Inspection

02/08/2022 | Real Time with...IPC APEX EXPO
Joel Scutchfield of Koh Young America and SMT007 Editor Nolon Johnson discuss the smart factory's need for a total inspection solution that includes SPI, AOI, DPI, API, and KSMART, along with multi-point inspection (SPI, pre, and post) to improve yields. As Scutchfield points out, "Connectivity alone does not equal a smart factory. It's what you do with the data."

Segment 12 of Koh Young Micro Webinar Series: Smart Factory Success

12/16/2021 | I-Connect007 Editorial Team
In under four minutes, presenter Ivan Aduna wraps up the series with the 12th episode, Smart Factory Success. Here he teaches viewers that realizing a smart factory means taking a practical approach to process and systems, while examining areas to improve productivity. Combining initiatives such as IPC-CFX, IPC-Hermes, and IPC-DPMX with machine learning and 3D measurement data generated during inspection, helps manufacturers define inefficiencies and boost line efficiency. As new data is fed to these algorithms, they learn and optimize their operations to improve performance, developing intelligence over time.



Copyright © 2022 I-Connect007. All rights reserved.