Construction Progress at the New WEPTECH Headquarters


Reading time ( words)

It´s moving forward! The construction progress of the new WEPTECH company headquarters is currently fully on schedule. The base plates of the office and connecting buildings as well as the production hall and warehouse were cast. The ground floor of the office building including the intermediate ceiling has been installed.

The completion of the exterior walls of the production halls is scheduled by February 2022. The hall roofs are then covered in order to start the interior construction of the halls. Further floors of the office building are to be completed at the same time.

Share

Print


Suggested Items

GEN3 Webinar, Part 9 Released: SIR, Additional Information

01/19/2022 | I-Connect007 Editorial Team
In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium. The ninth episode, “SIR, Additional Information” can be viewed in just under four minutes. Presenters discuss test duration, number of coupons, and whether SIR is good to use for qualification testing. Also covered in this segment: SIR and objective evidence.

GEN3 Webinar, Part 8 Released: New IEC Standards—A Walk Through

01/12/2022 | I-Connect007 Editorial Team
In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium. The eighth episode, “New IEC Standards—A Walk Through” can be viewed in just over five minutes. Presenters discuss scope, measurement technique, the B52 and field gradient, dummy components and the test chamber.

GEN3 Webinar, Part 7 Released: SIR Test Coupon Design

01/05/2022 | I-Connect007 Editorial Team
In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium.



Copyright © 2022 I-Connect007. All rights reserved.