-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Best Technical Papers at IPC APEX EXPO 2022 Selected
January 14, 2022 | IPCEstimated reading time: 3 minutes
The best technical conference papers of IPC APEX EXPO 2022 have been selected. Voted on by members of the IPC APEX EXPO 2022 Technical Program Committee (TPC), the paper authors will be recognized during show opening remarks on Tuesday, January 25.
“The TPC is absolutely focused on providing highest quality content to the technical conference,” said Matt Kelly, IPC chief technologist. “This commitment to quality is reflected in this year's selection of Best of Conference, NextGen, and Best Student Research papers. We extend our congratulations to all the award winners."
Taking top honors in the Best of Conference category, the winning papers are:
- “Analysis of a Dynamic Flexed Flat Cable Harness” by Bhanu Sood, Ph.D., NASA Goddard Space Flight Center. His co-authors are Mary E. Wusk, Eric Burke, Dave Dawicke, George Slenski, NASA Langley Research Center; and Stephen Lebair, NASA Goddard Space Flight Center. This paper will be presented during Technical Conference Session 7 on Tuesday, January 25.
- “Microvia Reliability Testing Utilizing D-Coupons to Understand Best Design Practice” by Kevin Kusiak, Lockheed Martin. This paper will be presented during Technical Conference Session 2 on Tuesday, January 25.
- “A Critical Analysis of CAF Testing—Temperature, Humidity, and the Reality of Field Performance” by Kevin Knadle, TTM Technologies, Inc. This paper will be presented during Technical Conference Session 11 on Tuesday, January 25.
The NextGen best paper is awarded to:
- “Bio-based Encapsulation Resins: Good for the Environment, Good for Your Environment” by Beth Turner, Electrolube. Turner will present her paper during Technical Conference Session 28 on Thursday, January 27.
Selected for the Student Research award, the best paper is:
- “Reliability and IMC Layer Evolution of Homogenous Lead-Free Solder Joints During Thermal Cycling” by Mohamed El Amine Belhadi, Ph.D. Candidate, Auburn University. His co-authors are Xin Wei, Palash Vyas, Rong Zhao, Sa’d Hamasha, Haneen Ali, Jeff Suhling, Pradeep Lall, Barton C. Prorok, all with Auburn University. The paper will be presented at Technical Conference Session 32 on Thursday, January 27.
In addition to the “best of” categories, eight papers were selected in the honorable mention category. Honorable mentions go to:
- “Towards Artificial Intelligence in SMT Inspection Processes” by Mario Peutler, Continental Automotive GmbH; co-authors Michael Boesl, Johannes Brunner and Thomas Kleinert, Ph.D., Continental Automotive GmbH.
- “A Multiphase Model of Intermittent Contact in Lubricated Electrical Contacts” by Robert Jackson, Auburn University; co-author Santosh Angadi, Nitte Meenakshi Institute of Technology.
- “Electro-thermal-mechanical Modeling of One-Dimensional Conductors, Whiskers, and Wires Including Convection, and Considering Tin, Bismuth, Zinc and Indium” by Robert Jackson, Auburn University; co-author Erika R. Crandall, TE Connectivity.
- “Design and Testing of Three Levels of Microvias for High-Reliability PCBs” by Maarten Cauwe, Ph.D., imec-CMST; co-authors Jason Furlong, PWB Interconnect Solutions; Stan Heltzel, ESA-ESTEC; Marnix Van De Slyeke, ACB; Bob Neves, Microtek Changzhou Laboratories; Kevin Knadle, TTM Technologies.
- “Recrystallisation and the Resulting Crystal Structures in Plated Microvias” by Roger Massey, Atotech GmbH; co-authors T. Bernhard, K. Klaeden, S. Zarwell, S. Kempa, E. Steinhaeuser, S. Dieter, F. Brüning, all with Atotech GmbH.
- “Defluxing of Copper Pillar Bumped Flip Chips” by Ravi Parthasarathy, ZESTRON Corporation; co-author Umut Tosun, ZESTRON Corporation.
- “Reliability SoH Degradation and Life Prediction of Thin Flexible Batteries Under Flex-to-Install Dynamic Folding, Dynamic Twisting and Battery Lamination” by Pradeep Lall, Ph.D., Auburn University; co-authors Ved Soni, Jinesh Narangaparambil, Hyesoo Jang, Auburn University; Scott Miller, NextFlex Manufacturing Institute.
- “Electromechanical Testing of Flexible Hybrid Electronics” by Mark Poliks, Ph.D., Binghamton University; co-authors Mohammed Alhendi, Behnam Garakani, Udara S. Somarathna, Gurvinder Singh Khinda, all with State University of New York at Binghamton.
All technical conference papers were evaluated on their technical content, originality, test procedures and data used to deduce conclusions, quality of illustrations and the clarity and professionalism of writing as well as value to the industry.
To register for the IPC APEX EXPO 2022 technical conference or for more information on all the activities taking place, including professional development courses, exhibition, standards development committee meetings, keynote presentations, networking activities and more, visit www.IPCAPEXEXPO.org.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.