MacDermid Alpha’s Electrolube to Present Two Keynotes on Resins and Coatings at IPC APEX EXPO


Reading time ( words)

MacDermid Alpha Electronics Solutions, a global supplier of integrated solutions from our Circuitry, Assembly and Semiconductor divisions that provides unmatched capabilities in electronics design and manufacturing, is pleased to announce that Electrolube will be participating in two technical conference sessions at this year’s IPC APEX EXPO, held at the San Diego Convention Centre, California, from 25-27 January.

Two of Electrolube’s senior representatives. Phil Kinner, Global Business and Technical Director for Electrolube’s Coatings Division, will present the paper ‘Conformal Coatings: State of the Industry Versus State of the Art’ on Tuesday January 25th from 10am-12pm at S04, EM1.  Phil is well-known for his expertise in coating chemistry and will be sharing some of Electrolube’s latest data taken from a study comparing the condensation resistance performance of assemblies coated with state of the art materials to those used in the state of the industry materials.

Beth_Turner_300.jpgBeth Turner, Electrolube’s Senior Technical Manager, will present the paper entitled ‘Bio-Based Encapsulation Resins: Good for The Environment, Good for Your Environment’ from 8-9.30am on Thursday January 27th at S28, EM4. Electrolube’s drive towards achieving a more sustainable future also encourages customers to embrace implementing sustainable materials into production. Environmental credibility runs throughout the company from product packaging right through to product development and Beth will be talking about how Electrolube’s new range of bio-resins can not only impact on a company’s environmental credentials, but also on the lifetime and performance of devices.

During the show, Electrolube, part of MacDermid Alpha Electronics Solutions, will demonstrate its advanced technical capabilities to the US market by launching a ground-breaking new bio coating, the first of its kind globally. Electrolube’s new UVCLX bio coating is an unrivalled eco-friendly innovation that will transform the conventional use of coatings by the global electronics community. The first-to-market UV Cure Coating Xtra is formulated with 75% bio-organic content from renewable sources and is one of Electrolube’s most versatile, high-performance coatings yet for protecting electronic circuitry against the harshest of environments.  

Electrolube will also showcase the new GF600 two-part, liquid silicone thermal gap filler, supplied in a 32oz duo cartridge. GF600 provides excellent thermal performance and can be cured at room temperature or accelerated with heat. After curing, GF600 forms a low modulus elastomer, preventing the ‘pump-out phenomenon’. The low viscosity gap filler is easy to dispense and is soft and compliant for low stress applications. With extremely high thermal conductivity of 6.0 W/m.K and a wide operating temperature range from -50 to 200°C, the flame retardant GF600 is ideally suited to filling gaps and air voids,  even in the most delicate of devices with minimal stress.

Visitors to IPC APEX EXPO are invited to meet members of the Electrolube and MacDermid Alpha Electronics Solutions teams at booth 2121. It is an ideal opportunity to find out more about how Electrolube’s newest solutions can help manufacturers speed up production, increase reliability and lifetime of products, as well as improve their environmental credentials.  Electrolube offers a wide range of electro-chemical products, which include thermal management, encapsulation resins, conformal coatings, contact lubricants, service and maintenance aids and cleaning solutions.

Share




Suggested Items

Book Excerpt: 'The Printed Circuit Assembler’s Guide to… Solder Defects'

06/07/2022 | I-Connect007 Editorial Team
Solder defects in surface-mount technology (SMT) assembly have been an issue for decades. Further, the combined challenges of Pb-free soldering and ever-increasing miniaturization have resulted in new or exacerbated defects in electronics assembly, but there are proven ways to avoid defects. This book will be especially beneficial to PCB assemblers in improving their assembly processes and the reliability of the end-product, eliminating field failures, and reducing costs.

The Data Format Effect on Business Costs

05/09/2022 | I-Connect007 Editorial Team
Nolan Johnson and Barry Matties talked with Axiom’s Rob Rowland and Kevin Bennett about current challenges facing EMS manufacturing. During this conversation, the pair discuss the impact of data file formats on pricing, manufacturing, and quality. As they explain, the use of intelligent data formats such as IPC-2581 and ODB++ can speed up the data import process compared to Gerber.

SMTA Atlanta: Peachy in the Peach State

04/27/2022 | Andy Shaughnessy, I-Connect007
I attended SMTA Atlanta Expo and Tech Forum last week, and it’s safe to say that this industry is definitely back in business in the Peach State. The aisles were busy all day, and the presentations were well attended.



Copyright © 2022 I-Connect007. All rights reserved.