Indium’s Tim Jensen to Participate in iNEMI Technical Series


Reading time ( words)

Indium’s Tim Jensen, global account manager and senior thermal technologist, will participate in the International Electronics Manufacturing Initiative’s virtual Packaging Tech Topic series, offering his insights into the increased adoption of metal thermal interface materials (TIMs) in high-performance computing at 8 a.m. New York/2 p.m. Berlin/9 p.m. Beijing on Tuesday, March 8.

Managing heat dissipation continues to be a critical part of design as high-performance IC packages advance. With polymeric TIMs reaching physical limits relative to thermal conductivity, there is a need for higher performing materials. Metal TIMs, which have high bulk thermal conductivity, are playing a critical role in addressing this need.

Because there are widely divergent needs for TIMs, five categories of metal TIMs technology are available to address subsets of these needs. In his webinar Proliferation & Advancement of Metal TIMs in High Performance Computing, Jensen will review these material categories, performance attributes, and key assembly parameters to enable attendees to make intelligent decisions on when to consider metal TIMs and which category of metal TIM might be the most appropriate for a given application.

Jensen is a global account manager and senior thermal technologist. In this role, he leads a matrixed team focused on engaging customers and commercializing new technology for the company’s TIMs products, including technology for 5G and AI. He is responsible for ensuring the product line is poised for long-term success by developing technologies that best meet the current and future needs of customers. In his more than 20 years with Indium Corporation, Jensen has led many efforts across printed circuit board assembly, engineered solder materials, and thermal product lines. He has spent years working directly with customers to develop processes and implement new product technologies. Using that direct knowledge and expertise, Jensen worked closely with Indium Corporation’s technical service, sales, and research and development teams to develop cutting-edge products that address the unique challenges faced by the electronics assembly industry. In addition to his responsibilities at Indium Corporation, he also serves on the SMTA’s Board of Directors. In this role, he is part of the Strategic Development Committee where he leads the effort on international expansion. Jensen has a bachelor’s degree in chemical engineering from Clarkson University and an MBA from Syracuse University.

 

Download The Printed Circuit Assembler’s Guide to… Solder Defectsby Dr. Ronald C. Lasky. You can also view other titles in our full I-007e Book library here. 

Share




Suggested Items

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.

Dave Hillman on Living Your Passion

03/29/2022 | Barry Matties, I-Connect007
Barry Matties leads this engaging retrospective conversation with Dave Hillman, a Fellow, Materials and Process engineer at Collins Aerospace, who talks about mentorship, pandemic changes, and solder. “Soldering is soldering,” Dave says. “But how we do that keeps evolving in response to the new technologies and smaller packages.” What’s the key to his success and longevity? “Find your passion.” Here’s how he’s done it.

IPC’s Dieter Bergman Fellowship Award Presented to Bev Christian, HDPUG

03/14/2022 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. Bev Christian is a facilitator for the High Density Packaging User Group (HDPUG) and an adjunct associate professor in the Department of Mechanical and Mechatronics Engineering of the University of Waterloo, Waterloo, Ontario, Canada. In the past 31 years he has held positions at Nortel, BlackBerry, and CALCE; all in the areas of materials and failure analysis. Bev has never missed an IPC APEX EXPO since its inception. He is a member of 27 IPC committees and attends as time and the lack of clones allow.



Copyright © 2022 I-Connect007. All rights reserved.