-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Preparing the Next-gen Tech Workforce
May 18, 2022 | Marc Carter, Independent ContributorEstimated reading time: 2 minutes
Knowledge transfer, especially from the “graying-out” experienced technical workers in our industry, is a complex, difficult family of problems. It differs wildly between companies, and even within divisions of the same company.
As if we needed any more impediments to replacing the “old gray guard,” even in companies that have the internal wherewithal to train replacements, there are barriers from internal forces. One of the biggest barriers is the full manufacturing schedules in North American electronics companies that don’t leave any slack time—and the 40-hour work week is a complete fantasy for many.
We can look at it from a slightly different perspective. Decades of margin pressure from, among others:
- The chicken and egg dynamic of outsourcing
- “Leaning” of tech staff
- Profit and loss pressure to minimize replacement of staff and equipment have greatly reduced the number of manufacturing knowledge/experience holders (subject matter experts) in the workforce that could provide the basis for a meaningful knowledge transfer program
In other words, some of the factors that go into the short-term focus on the balance sheet have eroded availability of the knowledge resources necessary to the hand-off of knowledge and experience.
That same thinning of the knowledge/experience ranks often leaves that “thin gray line” without enough time to do a proper job of keeping up with their operational duties, much less any organized knowledge transfer. The subject matter experts are harried, tired, and in some cases, discouraged.
It’s a unique (and commendably foresighted) company that will actually provide those subject matter experts with the necessary insulation from the daily damage control to devote any serious, compensated time to an organized knowledge transfer effort.
The declining number of subject matter experts are recognized by their peers as good at their jobs, which too often is technical firefighting, and very occasionally, technical improvement implementation, customer calming, and corporate reporting. The SMEs literally don’t feel they have any alternative to “go get Fred” when the wheels come off.
To what extent does corporate culture help or hinder effective knowledge transfer? One contributor is the difficulty in justifying the easy-to-capture (and immediate) direct costs of paying employees’ wages, against the difficult-to-monetize (and much longer-term) benefits to the organization.
At least we’re starting to recognize and study the problem. Acceptance and effectiveness of well-intentioned knowledge transfer policies varies between companies, levels, and even between “silos” within companies. A 2019 study by Tandemploy1 suggested only one-third of employees surveyed believed “their company promotes the exchange of information and knowledge,” though managers were almost twice as likely to believe that statement than non-managers. Lack of time set aside during the workday was a recurrent reason given for inhibiting the sharing of knowledge, though a considerable majority wanted to share with their colleagues the knowledge they had gained.
To read this entire article, which appeared in the February 2022 issue of SMT007 Magazine, click here.
Suggested Items
Cogiscan Collaborates with Koh Young to Unveil How Factory Insights Software Transforms Data Into Action at IPC APEX EXPO
03/28/2024 | Koh YoungKoh Young, the industry leader in True3D measurement-based inspection solutions, is excited to announce Factory Insights, the latest offering from Cogiscan, will be demonstrated alongside KSMART in Koh Young booth 2112 during IPC APEX Expo.
ASMC 2024 to Showcase AI, Smart Manufacturing and Sustainability to Advance Chip Industry Manufacturing Expertise
03/27/2024 | SEMIMore than 125 experts will offer insights into the latest semiconductor manufacturing strategies and methodologies as hundreds of industry stakeholders gather at the 35th annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC 2024), May 13-16 in Albany, New York.
NextFlex Announces $5M Education Fundraising Effort: First Spotlight - Transforming the Landscape for Women in Technology
03/27/2024 | BUSINESS WIRENextFlex Learning Programs, the education-focused arm of the NextFlex® Hybrid Electronics Manufacturing Innovation Institute, announces its first spotlight effort, “NextFlex Supports Women in STEM” to increase the number of women in STEM fields, which could accelerate U.S. GDP growth by boosting women’s cumulative earnings by $299B and adding $5.9T to the global stock market within 10 years according to S&P Global.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
ACDi Takes Milestone Delivery of the 23,000th Koh Young Machine
03/26/2024 | ACDiAccording to ACDi (American Computer Development, Inc.), “Flexible, reliable, and equipped to keep your project on schedule, is what you need as an electronics manufacturing services partner.”