-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Electrolube’s GF400 a Success in 5G Base Station Unit
May 18, 2022 | ElectrolubeEstimated reading time: 2 minutes
MacDermid Alpha Electronics Solutions, a global supplier of integrated solutions from our Circuitry, Assembly and Semiconductor divisions that provides unmatched capabilities in electronics design and manufacturing, has successfully implemented an efficient thermal management solution for a 5G application in China. Electrolube, part of MacDermid Alpha Electronics Solutions, was approached with a complex thermal management challenge for a base station design that could offer high thermal conductivity and long-term reliability.
5G base stations rely on advanced antenna technology in the form of massive MIMO antennas, which send and receive more data simultaneously over a wider mobile spectrum, referred to as mmWave frequencies. Despite being referred to as ‘massive’, these antennas are similar in size to the 4G antennas. Thus, 5G technology offers increased efficiency without increasing physical size; an ongoing trend in the electronics industry that is closely linked to the rapid growth in the efficient use of thermal management materials. Whilst increases in energy efficiency for data transfer are realised, the power consumption of 5G base stations is much higher than that of a 4G station, again highlighting the need for effective heat dissipation to avoid overheating. Thermal management is a critical element of 5G reliability and performance, and heat dissipation requirements need to be considered at the design phase.
Electrolube’s GF400 gap filler was found to be a highly successful thermal interface material to reduce heat in a multifaceted 5G base station unit design. GF400 is a material that is designed for use with higher thickness than a standard thermal interface material. It provides excellent thermal conductivity but also maintains its stability at these higher thicknesses, ensuring efficient and reliable heat transfer. The base band unit is a critical part of processing baseband signals, increasing capacity and reducing latency. At high temperatures, electromigration also occurs at a faster rate, noise is more intense, embedded antennas radiate less strongly at the desired frequencies, and a multitude of other problems arise in 5G systems. Solutions to these challenges must be addressed at the board level and through the use of thermal management solutions.
Electrolube’s GF400 is a two part, liquid silicone based gap filler that provides excellent thermal performance (4.0 W/m-K). With a wide operating temperature range between -50 to +200°C and non-flammable,GF400 is a dispensible material that can be applied to help dissipate heat from complex geometries. After curing, it forms a low modulus elastomer that can also relieve CTE stress during power cycling. The properties of GF400 make it one of the highest performing thermal management products for managing heat dissipation in data and telecom network applications. The advantages of GF400 showed a lower coefficient of expansion, lower modulus, better long-term reliability and improved cost performance, pushing it to the forefront of thermal management offerings for the connected world.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.