BayaTronics Pairs South-Tek Nitrogen Generator with Juki Selective Solder


Reading time ( words)

South-Tek Systems is pleased to announce that BayaTronics purchased a N2GEN TS Nitrogen Generator that pairs with the Juki iCube selective solder machine. The system was recently installed in BayaTronics’ new state-of-the-art facility in Concord, NC.

BayaTronics is a global technology, supply chain and manufacturing solutions partner. Design and production volume determine material cost, which has a major impact on the overall cost of a product. BayaTronics assists its customers with design for manufacturability, new product introduction, and the procurement of materials without burdening the customer with excess material cost.

Dirk Warriner, CEO of BayaTronics, commented: “South-Tek Systems supported BayaTronics with an economical source of ntrogen for our selective soldering process, which in turn will benefit our customers. We look forward to building on this relationship.”

The N2GEN series of PSA nitrogen generators are designed to produce a wide range of flow rates at nitrogen purities of 95 percent up to 99.999 percent. All units are custom designed and can be packaged with a dedicated air compressor, dryer and/or booster if needed for a complete turnkey solution. For larger flow rates or redundancy, duplexing options are available.

BayaTronics provides domestic customers with a high volume, cost competitive solution with superior quality. The company offers printed circuit board assembly (PCBA), final assembly and material management. Dedicated staff manage each customer’s end-to-end supply chain requirements.

Share




Suggested Items

Mining for Metals Requires a Long View

06/15/2022 | Nolan Johnson, I-Connect007
Nolan Johnson talks with Shaun Dykes, a 50-year expert in the mining industry. Dykes gives a concise primer on mining development, and the amount of time and effort required to develop and supply the mineral resources we depend upon for the manufacture of printed circuit boards. There are many factors that play into when and where a mine is developed—and what can prevent a mine from ever producing minerals.

Book Excerpt: 'The Printed Circuit Assembler’s Guide to… Solder Defects'

06/07/2022 | I-Connect007 Editorial Team
Solder defects in surface-mount technology (SMT) assembly have been an issue for decades. Further, the combined challenges of Pb-free soldering and ever-increasing miniaturization have resulted in new or exacerbated defects in electronics assembly, but there are proven ways to avoid defects. This book will be especially beneficial to PCB assemblers in improving their assembly processes and the reliability of the end-product, eliminating field failures, and reducing costs.

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.



Copyright © 2022 I-Connect007. All rights reserved.