MacDermid Alpha Launches ALPHA HiTech AD13-9910B Ultra-Low Temperature Adhesive


Reading time ( words)

MacDermid Alpha Electronics Solutions, a global supplier of integrated solutions from our Circuitry, Assembly and Semiconductor divisions, announces the launch of ALPHA HiTech AD13-9910B ultra-low temperature adhesive, designed to mitigate defects on very temperature sensitive parts and substrates.

ALPHA HiTech AD13-9910B can be cured at temperatures as low as 60°C enabling excellent adhesion strength and a reduction in the defect rate on temperature sensitive parts. The product is suitable for plastic parts or substrates that are very sensitive to high temperature exposure and exhibits excellent adhesion strength on Stainless Steel (SUS), Nickel, PCBs and Liquid Crystal Polymer (LCP).

“ALPHA HiTech AD13-9910B ultra-low temperature adhesive is able to fast cure at very low temperatures, with excellent dispensing performance,” comments Jimmy Shu, Product Manager Adhesives and Encapsulants at MacDermid Alpha. “The product meets market reliability requirements such as adhesion strength in high temperatures and high humidity making it an excellent solution for camera module, optical and other applications that are very sensitive to high temperature exposure.”

For more information on ALPHA HiTech AD13-9910B and our range of ALPHA HiTech Low Temperature Adhesives please visit MacDermidAlpha.com.

Share




Suggested Items

Axiom Inspired by Industry Challenges

09/20/2022 | Michael Schindele, Axiom
After living through more than two years of the pandemic, we are very aware of the issues facing the electronics industry. We have witnessed months of factory shutdowns, labor disruptions due to a reduced workforce, and country, regional, and citywide COVID regulations and shutdowns. I will describe some of the issues we’ve been facing, and then explain how we learned to be creative and look for the silver linings in these disruptions.

The CMMC 2.0 Countdown: Will You Be Ready When the Clock Hits Zero?

08/16/2022 | Divyash Patel, MX2 Technology
If you influence IT decisions at your workplace, you need to hear this. If you make the decisions, you need to listen, not just hear: Unless you start acting on CMMC compliance now, you are putting yourself at a disadvantage—one that will take much more time to correct than you might expect. Think of me as a spokesperson for the industry I represent: we are concerned about you. From what I’ve heard and seen over the last few months, too many of you are listening to suppliers, upstream and downstream partners, or other business owners on how seriously to take CMMC. As a result, far too much wishful thinking is guiding decision-making. So, listen to the experts.

Balancing Talent and Procurement Challenges

07/27/2022 | Nolan Johnson, I-Connect007
Ron Preston, vice president of supply chain at Green Circuits, outlines the company’s specific challenges with high-mix work. While the company excels at turning around boards in just a few days, difficulties in supply chain, materials, and staffing remain ever-present. What is to be done and how is Green Circuits working its way through these issues? The answers might surprise you.



Copyright © 2022 I-Connect007. All rights reserved.