SMTA Welcomes New Board Members

Reading time ( words)

The SMTA is pleased to announce its election results for the Global Board of Directors for the term beginning September 28, 2022. Martin Anselm, Ph.D., Rochester Institute of Technology was re-elected for a second term as President. Incumbents Julie Silk, Keysight Technologies and Robert Boguski, Datest Corporation, were re-elected and will maintain their positions as VP Tech Programs and VP Membership respectively. Fernando Rueda, KYZEN Corporation, and Patty Chonis, A-Tek LLC, have been newly elected to the Board of Directors.

Those remaining on the SMTA Global Board of Directors include: Secretary, Jason Keeping, P.Eng., Celestica, Inc.; VP Communications, Cheryl Tulkoff, NI; Treasurer, Gregory Vance, Rockwell Automation; Strategic Development Committee members include chairperson, Kirk Van Dreel, Plexus Corp.; William Capen, Honeywell FM&T; Adam Klett, Ph.D., L3Harris Technologies; and Mike Konrad, Aqueous Technologies.

The SMTA will bid a fond farewell to departing VP Expositions, Sal Sparacino, ZESTRON Americas. As his time on the Board draws to a close, the SMTA expresses its sincerest gratitude for Sal’s continued service and dedication to the association and industry.


Suggested Items

How Smart Are You?

04/25/2022 | Michael Ford, Aegis Software Corp.
The standard IQ test has been established for many years now. Though the content within these tests has been cleverly and carefully put together, there are different kinds of “smarts” among people. It is likely that those who are putting together IQ tests will favor the kinds of “smarts” that they themselves have. Humans are very complex, however. Everyone is different, with natural skills and abilities in a multitude of disciplines: technical, artistic, social, and others. Put us all together as a society, and we make a pretty good team, at least when we all work together and support each other.

Factors Affecting Quality of Solder Joints in Multi-Busbar Interconnection

08/17/2021 | Narahari S. Pujari, MacDermid Alpha Electronics Solutions
Tabbing and stringing is the dominant method in the market for making crystalline silicon (c-Si) solar cell modules. Soldering ribbons are used as an interconnection medium in this process on the four or five busbars of the front- and back-side metallization.

Top 10 Most-Read SMT Articles of 2020

12/31/2020 | I-Connect007
As 2020 comes to a close, the I-Connect007 Editorial Team takes a look back at its most read articles. Here are the top 10 reads in SMT from the past year.

Copyright © 2022 I-Connect007. All rights reserved.