Electronics Industry Calls for U.S. Presidential Determination on Key Components Under Defense Production Act


Reading time ( words)

The electronics industry is calling on U.S. President Joe Biden to address urgent industrial base vulnerabilities and deliver on the promise of the CHIPS Act by prioritizing domestic development of printed circuit boards (PCBs) and integrated circuit (IC) substrates under Title III of the Defense Production Act. 

Three industry groups – IPC, the U.S. Partnership for Assured Electronics (USPAE), and the Printed Circuit Board Association of America (PCBAA) – delivered a letter to President Biden, calling on him to issue a presidential determination on the matter.

“For more than 20 years,” the letter states, “experts in and out of government have warned that the erosion of U.S. PCB capabilities and capacity would compromise national and economic security. These warnings have proven all too accurate, as today, the U.S. share of global PCB production has fallen from 30 percent to 4 percent, making the nation precariously reliant on a global supply chain that is itself in turmoil.”

The Biden administration’s year-long assessment of the information and communications technology (ICT) supply chain highlighted the critical importance of PCB fabrication and assembly in electronics manufacturing and recommended that government programs like Title III be used to bolster the strength of U.S. PCB manufacturers.   

Supporting the entire electronics ecosystem is also “critically important to the implementation of the CHIPS Act,” the letter continues. “Presently, there are no U.S. manufacturers that can produce the volume of IC substrates needed to support defense and commercial needs.”  

Increasing domestic chips production without bolstering regional development and manufacture of cutting-edge PCBs and IC substrates risks lengthening and slowing the semiconductor supply chain, because many of the chips made in Arizona or Ohio will need to be sent to other countries for component packaging and assembly into finished products.

“A presidential determination on PCBs and IC substrates would be a key step toward rebuilding the U.S. electronics manufacturing industry,” Mitchell added. “The Executive Branch and Congress must continue to support – through long-term policy and funding – the entire ecosystem that drives and sustains innovative, resilient, and secure electronics manufacturing.”  

For more information, visit www.IPC.org.

About IPC

IPC (www.IPC.org) is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 3,000+ member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly, test and advanced packaging. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Atlanta, Georgia; Washington, D.C.; Munich, Germany; Brussels, Belgium; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

12/02/2022 | Nolan Johnson, I-Connect007
Normally, the holiday season is a slow(ish) news time, but this year just feels different. My opinion is that the technology industry banked up a whole bunch of innovations and new products during the pandemic disruptions, which are coming to market as quickly as possible. The November/December news is full of technology discussion, as my selections this week clearly demonstrate.

3D Electronic Devices With Additive Manufacturing

11/29/2022 | Shavi Spinzi, Nano Dimension
Imagine fabricating PCBs without the hassle of drilled vias and metal plating. Imagine PCBs with near-perfect registration. If we take it to the next stage, imagine drawing electronics in 3D space. There is a way to do all this with additively manufactured electronics (AME). We just need to start to think in 3D. This will allow us to abandon the 2D limitations that we have become so used to and expand our horizons so that we can climb to higher levels of performance. In this article, I will explore the two fundamental capabilities that are the cornerstones for drawing electronics in 3D space, which is where AME technology and 3D design capabilities converge.

Electronica 2022: Happy to Be Back in Munich

11/21/2022 | Pete Starkey, I-Connect007
As we stepped out of the hotel into the drizzling rain, we were relieved that it wasn’t snow. Looking down the escalator into the U2 platform in Munich’s Hauptbahnhof central station early on the morning of Tuesday, Nov. 15 and observing the mass of humanity pushing and shoving to cram into trains to the exhibition centre, it appeared that a significant proportion of the international electronics industry had gathered to attend electronica 2022, co-located with SEMICON Europa and recognised as the world’s leading trade fair and conference for electronics.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.