MacDermid Alpha Showcases Full Spectrum of Electrolube Solution at Productronica South China

Reading time ( words)

MacDermid Alpha Electronics Solutions, the leading global supplier of integrated circuit, assembly and semiconductor solutions for the electronics design and manufacturing industries, will be highlighting their unrivalled capabilities as a total process solutions provider at this year’s Productronica South China, which takes place at the Shenzhen World Exhibition and Convention Center, 15-17 November 2022, on the MacDermid Alpha Stand E17 in Hall 11.

MacDermid Alpha encompasses a full spectrum of industry-leading innovative technologies from Alpha, Compugraphics, Electrolube, Kester and MacDermid Enthone brands, giving manufacturers a distinct advantage in sourcing all their application-specific needs in one place. MacDermid Alpha has been taking a proactive response where innovation is concerned and identifying key areas in the market, rather than a passive reactive approach. Essentially, MacDermid Alpha, supplies solutions across all aspects of the assembly process from PCB manufacturing, PCB assembly and even reclaim and recycling services. 

MacDermid Alpha will showcase its’ latest new low temperature solder material. Designed to mitigate warpage induced defects in temperature sensitive chip-scale packages, the ALPHA OM-565 HRL3 solder paste enhances electrochemical performance over existing low temperature solders and provides excellent compatibility when used in combination with other ALPHA solutions for contact rework applications. ALPHA OM-565 HRL3 enables superior wettability to minimize post reflow defects such as Non-Wet-Open (NWO) and Head-in-Pillow (HIP). Next generation devices require a larger footprint and thinner form factor design that deliver superior processing power over existing technologies. These next generation packages create challenges for assembly at traditional SMT reflow temperatures. ALPHA OM-565 HRL3 enables a reduction in peak reflow down to 175 °C to mitigate common warpage induced defects such as HiP and NWO to improve assembly yields.

Electrolube,the most recent addition to the MacDermid Alpha family of brands is a specialist manufacturer for the electro-chemicals industry. The brand has amassed a wealth of local knowledge and experience pertaining to China’s domestic market since opening facilities in China twenty years ago.  The acquisition has proven successful for both MacDermid Alpha and Electrolube, the latter benefitting from an expansion of their Chinese Technical Support team. The brand has also recently launched a new generation of bio-based conformal coatings and encapsulation resins.  Electrolube’s new bio-based products build upon their already strong portfolio of solutions.  Not only do these new products offer environmental benefits but they also provide high performance protection and increase reliability.

Featured at the show will be a new bio-based polyurethane resins, UR5645, is a tough, two-part encapsulation system ideal for a wide range of applications including automotive and marine. UR5645 is a highly versatile resin with an operating temperature range of -50 to +150oC and is a low viscosity resin that enables a faster and more efficient potting process. It also provides excellent chemical resistance to acids, alkalis and fuels, ideally suited for the harshest conditions, such as those found in automotive applications.

Electrolube additionally offer a wide range of conformal coatings and thermal management materials. UVCL is a low viscosity coating with the capacity to cure within seconds of exposure to the correct dosage of UV light. UVCL is one of Electrolube’s next generation of VOC-free coatings, and the product’s low viscosity ensures that it is eminently suitable for selective spray equipment. The secondary moisture cure ensures even shadowed areas can be cured successfully.

Electrolube’s GF400 is an extremely versatile gap filling material, suitable for a wide variety of applications, including e-vehicles and chargers. This two-part silicone-based filling material cures at room temperature but the cure can also be accelerated by heat. An impressive thermal conductivity of 4.0 W/m.K is a feature of this gap filler and following cure, a low modulus elastomer avoids pump out phenomenon.          

MacDermid Alpha’s vast interconnection of specialty electronics solutions ensures that manufacturers can access all areas of the electronics supply chain in one place. Visitors to Productronica South China are welcome to visit the team on Stand E17 in Hall 11 and talk to our technical experts on their application requirements.

Allen Chen, General Manager China, comments, “We are looking forward to attending the Productronica South China exhibition as a group of aligned brands offering cutting edge solutions for manufacturers. MacDermid Alpha has gone from strength to strength in recent years, developing product innovations that really meet the demands of our customers. Our investments and international collaboration with leading OEMs have enabled us to firmly position ourselves in the market as a reliable and trusted ‘one-stop’ provider at every stage of design and production.”

MacDermid Alpha Electronics Solutions serves all global regions and all steps of device manufacturing within every segment of the electronics supply chain. The experts in our Semiconductor Solutions, Circuitry Solutions, and Assembly Solutions divisions collaborate with OEMs and fabricators in the implementation of new technologies that redefine what is possible in device design. Our world class technical service is constantly at hand to ensure optimized outcomes in yield and productivity. Our solutions can increase throughput, reduce carbon footprints, lower total cost of ownership, and enable electronics innovation.


Suggested Items

SMT Tooling, PSA: 'Perfect Marriage of Innovation and Product'

10/26/2022 | Nolan Johnson, I-Connect007
Jeffrey Pulaski describes the recent partnership between SMT Tooling and PSA, which brings SMT Tooling’s innovation and PSA’s manufacturing capabilities together. Pulaski also shares news on product development, and what visitors to SMTA International can expect to see in SMT Tooling’s floor presence.

KYZEN Comes Clean For SMTAI

10/19/2022 | Andy Shaughnessy, I-Connect007
In this interview, KYZEN Executive Vice President Tom Forsythe explains his company’s plans for the upcoming SMTA International show in Minneapolis, Minnesota, Oct. 31-Nov. 3. He discusses KYZEN’s latest aqueous cleaning chemistries and the company’s focus on providing reliable cleaning equipment and accurate data for customers. "This is the latest in that expanded envelope, with better economics, and better environmental health and safety," he says. "It's all part of this trend of always trying to be a better product and deliver better value.

SMTA International Technical Conference: Trending on Topic

10/19/2022 | SMTA
One of the highlights of SMTA International is the Technical Conference, where more than 100 papers will be presented across at least 30 sessions. “Work that was delayed due to the effects of COVID has been completed and the amount of material coming from the industry is impressive,” says Julie Silk, VP of technical programs. “We have a packed conference this year in Minneapolis.”

Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.