Solderstar Presents Zero Set Up Datalogger with New Vacuum Level Measurement at IPC Apex Expo


Reading time ( words)

Solderstar, technology leaders in the design and development of temperature profiling equipment for the electronics industry, will present their expanded range of products at IPC APEX Expo 2023, San Diego, California, from January 24–26, 2023. Central to their booth will be the zero set-up SLX thermal datalogger which has recently been updated with a new extension to measure vacuum level in a reflow oven.  

As electronic products continue to become smaller and more complex in construction, it is crucial to have soldering processes that can be adapted to achieve solder joints with fewer voids to increase reliability and improve product performance. A method gaining traction in the challenge to reduce voiding is vacuum reflow. To ensure the new SLX could enhance profile information at all stages of the soldering process, Solderstar has added an interface with advanced measurement adapters to verify parameters within the vacuum stage.

Mark Stansfield, CEO at Solderstar said: “Since launching the SLX thermal profiler, we have seen significant interest from companies looking for reliable temperature data capture to achieve solder joints with fewer voids. What differentiates SLX from other dataloggers is its zero set-up feature. As a result, it can be used quickly and easily to measure and record process parameters from any soldering process. 

“Reflow oven manufacturers are starting to include a vacuum chamber stage in the oven to help to reduce voids. To ensure SLX is a long-term investment and effectively captures all parameters, we recently enhanced the system with additional sensors. These measure the temperature profile in the reflow oven, and the pressure level when the SLX passes through the vacuum chamber stage. 

“There is a fundamental reason why we updated the SLX with additional sensors. Vacuum reflow has proven to reduce void levels and improve long-term stability and reliability of the solder joint. However, the vacuum level and rate at which the vacuum is applied are critical parameters that could not be measured independently to the temperature profile. The added feature allows the temperature profile in the reflow oven and the pressure level in the vacuum chamber stage to be captured simultaneously.

“This is particularly important when manufacturing high-reliability electronics. For example, if vacuum levels are not measured carefully it can result in insufficient void removals, or unnecessarily extended hold times in the vacuum. This means throughput is negatively affected with increased cycle times, and in-the -field reliability problems increase leading to rework or component failure.

“IPC Apex brings together industry professionals looking for solutions to manufacture quality electronics. Therefore, it is an ideal platform to introduce visitors to the Solderstar SLX with its advanced smart adapters to allow profiling of soldering machines with zero setup and configuration and independent vacuum level measurement.”

The zero-user setup SLX allows faster and more accurate noise-free measurements from up to 12 temperature channels while simultaneously measuring from other secondary process parameter sensors. Furthermore, it works seamlessly with the latest version of the Solderstar profile analysis software, which is available for all the SLX units.

To view the advanced SLX system with its zero setup functionality, powerful multi-memory features, and the new vacuum level measurement integration, visit the Solderstar experts on booth 2010 at IPC APEX Expo 2023, San Diego, California, from January 24–26, 2023.

Share




Suggested Items

SMT Tooling, PSA: 'Perfect Marriage of Innovation and Product'

10/26/2022 | Nolan Johnson, I-Connect007
Jeffrey Pulaski describes the recent partnership between SMT Tooling and PSA, which brings SMT Tooling’s innovation and PSA’s manufacturing capabilities together. Pulaski also shares news on product development, and what visitors to SMTA International can expect to see in SMT Tooling’s floor presence.

KYZEN Comes Clean For SMTAI

10/19/2022 | Andy Shaughnessy, I-Connect007
In this interview, KYZEN Executive Vice President Tom Forsythe explains his company’s plans for the upcoming SMTA International show in Minneapolis, Minnesota, Oct. 31-Nov. 3. He discusses KYZEN’s latest aqueous cleaning chemistries and the company’s focus on providing reliable cleaning equipment and accurate data for customers. "This is the latest in that expanded envelope, with better economics, and better environmental health and safety," he says. "It's all part of this trend of always trying to be a better product and deliver better value.

SMTA International Technical Conference: Trending on Topic

10/19/2022 | SMTA
One of the highlights of SMTA International is the Technical Conference, where more than 100 papers will be presented across at least 30 sessions. “Work that was delayed due to the effects of COVID has been completed and the amount of material coming from the industry is impressive,” says Julie Silk, VP of technical programs. “We have a packed conference this year in Minneapolis.”



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.