-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Rehm Provides Information at the Conformal Coating Seminar
December 23, 2022 | Rehm Thermal SystemsEstimated reading time: 2 minutes
At the end of 2022, Rehm Thermal Systems in Blaubeuren had an agenda packed full of various information events relating to the world of electronic assemblies. In particular, the seminar “Protecting electronics from A to Z” attracted a lot of attention. Rehm’s experts talked about all the important issues surrounding effective and sustainable protection of printed circuit boards for electronic components in front of an interested audience.
On-site seminar: Protecting electronics from A to Z
Whether in consumer electronics, automotive and avionics, building and household technology, medical technology or renewable energies, sensitive electronics are becoming increasingly powerful and compact. At the same time, however, industry requirements regarding quality are growing, previously unknown error patterns are emerging – and new hurdles are appearing. Whether humidity, dust, cold, heat, UV radiation or colonisation by mosses, fungi and microorganisms, the correct protection of electronic components is as necessary as it is complex. With the face-to-face seminar “Protecting electronics from A to Z”, Rehm informed interested audience members from industry and production about the basics and diversity of coating technology as well as about failure analysis during the production process and on the coated product. The discussions included possible failure scenarios from dendrite growth to creepage distances and signal distortions, but also the selection of available coatings and application processes as well as the correct handling of defects.
The conclusion of the face-to-face seminar was that protecting electronics is becoming increasingly important. Using the appropriate finishing not only extends the service life significantly, but also increases the quality of the coated product – and ensures that end customers are satisfied. At the other end of the spectrum, however, neglecting safety aspects can (depending on the application) even put lives in danger. High-quality, innovative bonding, dispensing and potting solutions as well as process technologies tailored to them offer solutions for every application.
Protecting electronics with the Protecto series from Rehm
As a technology leader, Rehm Thermal Systems is globally active in every industry and is very familiar with the wishes of its customers. Accordingly, the Protecto series from Rehm delivers safe, automated processes and precise results in the application of a wide range of materials. Up to four applicator heads can be used at a time, offering users a wide range of options and the most diverse material bonding. In addition to dispensing, this includes the ability to create freely definable, three-dimensional housings through simple application, the immediate curing of UV varnishes and the potting or bonding of different materials. The modern and uniform ViCON software integrates all available Rehm systems and enables intuitive operation and fast project creation.
Suggested Items
IMI Taps New Opportunities to Sustain Grit in China
03/28/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI), Joey S. Bantatua, IMI China’s head of operations and general manager was recently interviewed by Asia Electronics Industry (AEI) magazine where he talked about the prospects of the country both as a market and a production hub.
Kimball Electronics Publishes Annual Sustainability Disclosures with its 2023 Guiding Principles Report
03/28/2024 | BUSINESS WIREKimball Electronics, Inc. published its annual sustainability disclosures in its 2023 Guiding Principles Report, themed “How We Are Winning Together The Kimball Way.”
iNEMI Webinar: Humidity Robustness and Insulation Coordination for e-Mobility
03/27/2024 | iNEMIThis webinar is a follow-up to the recent Seminar on Humidity Robustness and Insulation Coordination for e-Mobility, organized by iNEMI and ZESTRON Europe and supported by the ECPE.
Electronics Industry Sentiment Rises in March
03/27/2024 | IPCIPC releases March 2024 Global Sentiment of the Electronics Supply Chain Report
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.